Installation Manual

Versus Technology, Inc.
DT10000-A0001 1 Revision 8 December 1998
1. INTRODUCTION
1.1 Purpose of This Guide
This guide provides the information required to install the hardware and wiring. Read this entire document
before proceeding with the installation.
1.2 Scope of Use
This document is intended to provide the information required to install an IR system. A general understanding
of wiring and telephone installation techniques is assumed.
1.3 Installation Sequence
The installation procedures are generally organized as follows:
1. Provide a site visit to the facility
2. Run appropriate installation wires between hardware locations
3. Document wiring configuration
4. Install hardware components
5. Test hardware wiring
6. Installer sign-off