User`s manual

7
www.versitron.com FVxM4CCx
Indicator LEDs
The stand-alone units have integral LEDs that are used to monitor the state of the unit. There
are four video LEDs, one power LED and one data LED on each unit. The indicator LEDs
function as follows:
TRANSMITTER and RECEIVER:
Power: ON: (Orange) Indicates that correct power has been applied
Transmitter:
Video: OFF: Indicates no video detected on input BNC connector
(No Video present on input BNC)
ON: (blue) Indicates video detected on input BNC connector
(Video present on input BNC)
Data: OFF: Indicates no data detected on the transmit data cable
Blinking: (Blue) Indicates data transmitted at the rate of the operation data.
Receiver:
Video: OFF: Indicates no video present on output BNC connector
(No Video present on output BNC)
ON: (Blue) Indicates video detected on output BNC connector
(Video present on input BNC)
Data: OFF: Indicates no data detected on the receive data cable
Blinking: (Blue) Indicates data received at the rate of the operation data.