User`s manual

6
www.versitron.com FVxM4CCx
INSTALLATION INSTRUCTIONS
Installation Procedure
The VERSITRON VersiVision FVTM4CCx and FVRM4CCx video transmission systems
series are preset for immediate use. There are indicator LEDs on the units for monitoring the
real-time status of video, data and power. The following instructions describe the typical
installation procedure and the function of the LED indicators located on each unit.
1. Connect the video source (camera) to the video input BNC connector on the transmitter unit
(FVTM4CCx) using coaxial cable.
2. Connect the video output BNC connector on the receiver unit (FVRM4CCx) to the video
monitor using coaxial cable.
3. Connect the fiber optic cable between the transmitter and receiver units.
4. Apply the power supply to both the transmitter and receiver units.
5. When the power is applied, the orange POWER LED will light, indicating the presence of
operating power. The blue VIDEO LED and the blue DATA LED will give an indication as
stated on the following pages.
6. The system should now be operational.