Installation guide

www.versitron.com
9
2. Connect the power adapter cable to the switch before connecting the adapter to the AC outlet.
2.3 Port Configuration
The switches provide port configuration function through the management interface. The setting
options are shown as follows:
Port Type TP PORTS FX PORT
Auto-negotiation Enable / Disable Not allowed
Speed options 100M / 10M Not allowed (fixed 100M)
Duplex options Full / Half Not allowed (fixed Full)
When auto-negotiation is enabled, the speed and duplex settings become the port’s highest ability
used for the auto-negotiation process. The final configurations used with the connected device may be
different from the settings after negotiation between two devices. As auto-negotiation is disabled, the
speed and duplex settings are the forced operating configuration for the connection.
The real time port status for each port connection can be monitored through the management
interface. Status indicators are as follows:
Link Physical link status
Speed Connection speed used
Duplex Duplex mode used
Flow control Flow control status after negotiation