Installation guide

www.versitron.com
7
1.3 FX Port Optical Specifications
Model Connector Wavelength Max. Distance Rx sensitivity
S70553M MM*1 ST 1310nm -20 ~ -14dBm -31dBm
S70554M MM SC 1310nm -20 ~ -14dBm -31dBm
S70555M-2 SM*2 SC 1310nm -15 ~ - 8dBm -31dBm
*1: Multimode fiber
*2: Single Mode fiber
1.4 Management Specifications
Interface In-band web browser for IE4.0 and Netscape4.x
Ping command, ARP command
Protocols IPv4, ARP, ICMP, UDP, TCP, DHCP client, Http server
IP Setting DHCP dynamic IP mode (default mode)
Static IP mode (default: 192.168.0.2)
DHCP DHCP client ID = Device model name + MAC address
Security Login password checking
Password setting (default: 123)
Port Monitoring All ports: port status monitoring
Link, Speed, Duplex, Flow control status
Port Control Per TP port configuration settings
Auto-negotiation function: enable, disable
Speed: 100M, 10M
Duplex: full, half
VLAN VLAN mode selection: Port-based, 802.1Q (Tag-based)
Port-based VLAN 16 VLAN groups
Member ports setting for each group
PVID (12-bit VLAN ID value) setting for each port
802.1Q VLAN 16 VLAN groups
Member ports setting for each group
PVID (12-bit VLAN ID value) setting for each port
Tag/Untag mode setting for each port
Restore Default Restore factory default settings
Refer to Appendix for factory default settings
Reboot In-band remote boot the switch