Installation guide

www.versitron.com
6
1.2 Specifications
S7055xM P1-P4 Port 1 ~ Port 4 Twisted-pair switched ports (TP ports)
S7075xM P1-P6 Port 1 ~ Port 6 Twisted-pair switched ports (TP ports)
TP Port IEEE 802.3 10BaseT, 802.3u 100BaseTX std.
Shielded RJ-45 jacks with Auto MDI-X detection
Auto-negotiation capable
Speed for 10Mbps or 100Mbps
Full duplex or half-duplex support
FX Port IEEE 802.3u 100BaseFX compliant
Fixed 100Mbps full duplex operation
Flow Control IEEE 802.3x pause packet for full duplex operation
Back pressure for half-duplex operation
Cables 10BaseT Cat. 3, 4, 5 or higher (100 meters max.)
100BaseTX Cat. 5, 5e or higher (100 meters max.)
100BaseFX multimode or single mode fiber cable
LED indicators Power status
TP ports: Speed, Link/Activity, Duplex/Collision Status
FX ports: Link/Activity, Duplex/Collision Status
Filtering rate 14,880pps for Ethernet (10BaseT)
148,800pps for Fast Ethernet (100BaseTX)
Forwarding rate 14,880pps for Ethernet (10BaseT)
148,800pps for Fast Ethernet (100BaseTX)
Filtering address Multicast/Broadcast/Unicast address
MAC address 2K entries
Aging time 300 seconds
Priority levels 2 outgoing priority queues (Ratio: High/Low = 4/1)
VLAN mode 1. Port-based VLAN 2.802.1Q VLAN (Tab-based)
VLAN groups 16 groups (Group 0 ~ 15)
Port PVID Full 12-bit VID, per port setting
Port Tag Mode Tag/Untag mode, per port setting
Environment Temperature 0°C to 40°C
Relative humidity 10% to 90% non-condensing
Dimensions 144mm x 100mm x 26mm (WxDxH)
5.67 x 3.94 x 1.02 inch
DC IN Power Rating +7.5V min. 1A
DC IN Jack D6.3mm D2.0mm
Operating voltage +6.5V ~ +12.5VDC (Device DC input)
Power Consumption 7W @max. (with power adapter)