Installation guide

www.versitron.com
13
2.9 LED Indicators
Functions
POWER: indicates the status or the power supplied to the switch
100/10: indicates the connection speed between the TP port and the associated connected device.
LINK/Act: indicates the port link and activity status
FDX/Col: indicates the duplex mode and collision occurrences
The following table lists the LED status and the indications:
LED State Indication
POWER OFF No power is supplied to the device.
ON Power is supplied to the device.
100/10 OFF 10Mbps is used.
ON 100Mbps is used.
LINK/Act. OFF No active cable link is established.
ON An active link is established.
Blink Tx/Rx activities.
FDX/Col. ON Full duplex is used.
OFF Half-duplex is used.
Blink Half-duplex and collision occurrences.