Installation guide

www.versitron.com
11
3.3 Making Fiber Connection
For different fiber connections, several alternative models can be selected for different fiber
connections. Refer to Section 1.2 for model selection. The following figure illustrates a
connection example between two SC fiber ports:
100FX Duplex Selector
This selector is used for 100FX port duplex mode selection as follows:
The following table lists the maximum MM fiber cable length connecting to different devices:
Connected Device Distance (MMF cable)
Network card half-duplex fiber port 400 m
Network card full-duplex fiber port 2 km
Class I hub half-duplex fiber port 160 m
2 Class II hub half-duplex fiber port 112 m
Switched half-duplex fiber port 400 m
Switched half-duplex fiber port 2 km