Installation guide

Appendi
x
A.1 Installing Remote Boot ROM
Before you can use the remote boot function, you have to setup
the
remote boot service on the file server and install the remote
boot
ROM onto the adapter.
The remote boot ROM is optional and must be purchased sepa-
rately. The adapter boot ROM supports both PXE and RPL proto-
cols
at
the
same
time.
Consult
your
dealer
for
the
availabilit
y
.
To install the boot ROM, make sure the notch of the boot ROM
is
in the same direction as the notch of the socket on the adapter.
The
remote
boot
ROM
socket
is
labeled
U3
on
the
adapte
r
.
After installation, use RSET8139 utility program provided in
the
driver
diskette
to
enable
boot
ROM
function.
To setup remote boot services in different operation systems,
refer
to the associated operation manual of each network operation sys-
tem.
19