Installation guide

4.
LED
Indicators
Each
Fast
Ethernet
adapter
has
three
LEDs.
The
func
tions
are:
4.1
Interpretations
The
interpretations
of
the
LEDs
are:
Link
LE
D
indicates
an
active
100Mbps
connection
is
established.
On : Good link between the adapter and a remote device
Off : No connection between adapter and a remote device
Blink: Not applicable
Activity
LE
D
indicates
packets
are
being
received
or
transmitted.
Blink : Network traffic is present
On : Not applicable
Off
:
No
traffi
c
FDX
LE
D
indicates
duplex
mode
used
for
the
connection
On : Full duplex mode is used
Off
:
Half
duplex
mode
is
used
If you experience any problems, first make sure that the appropri-
ate driver is loaded, the proper cable is connected to the
connector,
and the connected device complies with 100BASE-FX
standard.
Then recheck the LED.
18