Installation guide

3.3
Installation
for
Windows
Systems
For adapter installation on Windows XP, Windows 2000, W
inME
systems, the system will detect and configure the drivers for
the
adapter automatically with no need for extra driver setup.
The
adapter
is
detected
as:
WinXP Realtek RTL8139 Family PCI Fast Ethernet
NIC
Win2000 Realtek RTL8139(A) PCI Fast Ethernet
Adapter
WinME Realtek RTL8139(A) PCI Fast Ethernet Adapter
Link
Speed/Duplex
Mode
options:
Auto Mode FX port becomes 100M Full Duplex
100 Half Mode FX port becomes 100M Half Duplex
Note:
other
values
are
not
recommended.
To apply Wake-On-Lan function, set [Power Management] option
of the Adapter driver Properties:
[ x ] Allow this device to bring the computer out of standby.
[
x
]
Allow
the
computer
to
turn
off
this
device
to
save
powe
r
.
The settings allow the adapter to wake up the computer out o
f
standby
state
when
receiving
magic
packe
ts
or
Ping
packets.
Using
the
Associated
Drivers
in
the
driver
diskette
After driver setup, the adapter is identified as :
Realtek
RTL8139/810x
Family
Fast
Ethernet
NIC
16