Installation guide

Inserting
the
Adapter
into
the
PCI
Slot
2.2
Configurin
g
W
ake
-
On
-
LAN
If your system is a PCI 2.2 complaint system, no extra
installation
for WOL is required. The WOL interface is accomplished
through
the PCI bus interface directly.
If
your
system
is
a
PCI
2.1
complaint
system,
follow
these
steps:
1. Make sure your system motherboard is RWU capable.
2. Make sure WOL function is enabled in the system BIOS.
3. Locate the 3-Pin WOL connector on the system motherboard.
4. Plug one end of the WOL cable to the 3-Pin WOL connector of
the adapter.
5. Plug the other end of the WOL cable to the 3-Pin WOL
connector on the system motherboard.
12