Installation Guide

MANUFACTURER’S INSTALLATION INSTRUCTIONS

FLASHING AND CONSTRUCTION DETAILS

2 | Versetta Stone

1 .1 Sheathing and Wood Studs—Foundation Wall Base. pg3

1 .2 Sheathing and Wood Studs—Universal Corner. pg4

1 .3 Sheathing and Wood Studs—Inside Corner. pg5

1.4 Sheathing and Wood Studs—Siding Termination with Versetta

Sill. pg6

1.6 Sheathing and Wood Studs—Window Sill. pg7

1.21 Sheathing and Wood Studs—Window Sill - Stone Partial Panel. pg8

1.7 Sheathing and Wood Studs—Window Jamb. pg9

1.8 Sheathing and Wood Studs—Window Head with Versetta

J-Channel. pg10

1.8A Sheathing and Wood Studs—Window Head with Versetta

Starter Strip. pg 11

1.12 A Top of Framed Wall at Roof—Tight Eave. pg12

1.13 Sheathing and Wood Studs—Vertical Wood Trim. pg13

1.14A Horizontal Trim Flashing. pg 14

1.14B Sheathing and Wood Studs—Siding Termination without Versetta

Sill pg 15

1.15 Trim Stone Window—Jamb Termination. pg16

1.16 Trim Stone Door—Jamb Termination. pg17

1.17 Soft Termination. pg18

1.18 Electrical/Light Box Accessory. pg19

1.19 16” Square Column. pg 20

1.20 Bay Window Miter Detail. pg 21

Figure

Table of Contents

These construction details are provided to assist in the installation of BORAL Versetta Stone

product(s). These

construction details will not necessarily apply to every design circumstance that you encounter. These construction

details may, and most likely will, require modiﬁcations to meet your particular design requirements. Manufacturer

accepts no responsibility or liability for the use of these or other construction details.