SDS

Section 4. First Aid Procedures
There are no First Aid requirements for these products as sold.
When sawing or sanding minor chips and dust will be produced.
See Section 8. For Personal Protection
Section 5 Fire Fighting Information
This material is not flammable according to OSHA classification. It will burn at a nominal ignition point of 475 degrees F.
Section 6 Accidental Release Measures
Very small amounts of wood dust may be released during sawing and sanding of this product. See Section 8 for
protection methods. Vacuum or sweep dust and chips and dispose of accordance with local landfill directives
Very small amounts of Formaldehyde may be released during long term storage of this product. See Section 7 for
proper storage methods
Section 7 Handling and Storage
This material in, large quantities, should be stored in a well ventilated area to prevent the possible build up of
Formaldehyde fumes
Section 8 Exposure Control Measures :
Personal Protection Equipment.
When cutting, sawing or sanding this material Safety Glasses with Side Shields should be worn.
Section 9 Physical and Chemical Properties
This product is manufactured from 8 foot strips of Medium Density Fiberboard with a melamine micro laminate glued
overlay. Some models have a high impact polystyrene channel imbedded on the underside. See Section 3 for ingredents
Section 10 Stability and Reactivity
Stability: This product as sold is stable
Incompatibility: Strong Acids or Strong Oxidizers will cause some decomposition of the base product.
Hazar
dous decomposition: Excessive moisture, heat, acids, and oxidizers will cause decomposition and release minor
amounts of Formaldehyde.
Polymerization: Will not occur
Section 11 Toxicological Information
As sold this product does not have toxicological properties.
Sanding and / or sawing may produce small amounts of wood dust.
As sold there are no known materials in these items that will cause acute toxicological reactions.
Section 12 Ecological Information
There are no known materials harmful to the ecology included in these products.
Section 13 Disposal Considerations
Scrap pieces may be disposed of in normal landfills in accordance with local regulations
Section 14 Transpiration Information
As sold these items are not regulated by US Department of Transportation
Section 15 Regulatory Information