Product Card
Table Of Contents
- Cloud Services Gateway 300 Series
- At a Glance
- CSG300 Appliance Models
- Chassis Views
- CSG300 Series Appliance Specifications
- Chassis Specifications
- CSG300 Series Appliance SKUs
- Regulatory Compliance
- Certifications
- Export Control Information
- Front and Rear Panel Components
- Front Panel
- Rear Panel
- Additional Information
- Network Interface Card Modules
- LTE Modem Module
- Embedded WiFi Module
- Interface Numbering
- Power Supply and Airflow
- AC Power Supply
- Airflow Requirements
- Installation Guidelines
- General Safety Guidelines
- Federal Communication Commission Interference Statement
- Prepare the Site for Installation
- Site Preparation Guidelines
- Environmental Requirements
- Rack Requirements
- Airflow Requirements
- Install a CSG300 Series Appliance
- Unpack a CSG300 Series Appliance
- Packing List for a CSG300 Series Appliance
- Mount a CSG355 or CSG365 Appliance in a Rack
- Connect a CSG300 Series Appliance
- Step 1: Connect Earth Ground to a CSG300 Series Appliance
- Step 2: Connect AC Power to a CSG300 Series Appliance
- Step 3: Configure a Management Console to Connect to a CSG300 Series Appliance
- Step 4: Connect a CSG300 Series Appliance to a Management Console
5. Grasp both sides of the appliance chassis, making sure that the front of the chassis is facing you.
6. Stand in front of the rack and lift the chassis. Then, gently insert the chassis into the rack and slide it as far back as
possible.
Figure 4: Insert a CSG365 Series Appliance into the Rack
7. Have the second person secure the mounting ears to the front of the rack using the rack-mount screws that are
shipped with the appliance. Insert and then tighten the screws.
Figure 5: Secure the Mounting Ears to the Rack
https://docs.versa-networks.com/Versa_Internal/WIP/Antony/Cloud_Services_Gateway_300_Series
Updated: Tue, 01 Dec 2020 03:50:36 GMT
Copyright © 2020, Versa Networks, Inc.
28