Product Card

Table Of Contents

around your bare wrist, making good skin contact. Failure to use an ESD grounding strap could damage the appliance.

• Install the CSG300 series appliance in compliance with the following local, national, and international electrical

codes:

• United States—National Fire Protection Association (NFPA 70), United States National Electrical Code.

• Other countries—International Electromechanical Commission (IEC) 60364, Part 1 through Part 7.

• Evaluated to the TN power system.

• Canada—Canadian Electrical Code, Part 1, CSA C22.1.

• Locate the emergency power-off switch in the installation area. In case of an electrical accident, turn off the power

quickly.

• Disconnect power to the appliance before installing or removing it.

• Disconnect power from the circuit that is being used for the appliance.

• If hazardous conditions exist, do not work alone.

• If you are working under conditions that might be hazardous to the eyes, wear safety glasses or goggles.

Caution: There is a risk of explosion if the battery is replaced by an incorrect type.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate this equipment.

This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

https://docs.versa-networks.com/Versa_Internal/WIP/Antony/Cloud_Services_Gateway_300_Series

Updated: Tue, 01 Dec 2020 03:50:36 GMT