Product Card

Table Of Contents

AC Power Supply

By default, CSG300 series appliances ship with one AC power supply unit.

If you order the CSG300 series appliance with the power-over-Ethernet (PoE) NIC module, an additional power supply

unit ships with the appliance.

Table 1 describes the AC power supply specifications for each power supply unit.

Table 1: CSG300 AC Power Supply Specifications

Item Specification

AC input voltage 100–240 Volts

AC input line frequency 50–60 Hz

Typical power consumption with PoE disabled 35 Watts

Typical power consumption with PoE enabled 60 Watts

Airflow Requirements

The CSG300 series appliance is made of aluminum for optimal heat dissipation.

The appliance is cooled by a fan.

When planning your site for installing a CSG300 series appliance in a 19-inch rack, allow a minimum of 0.5 RU space on

each side of the appliance to allow hot air to flow out of the appliance.

When placing a CSG300 series appliance on a desk, ensure that the vents on the side of the unit are never blocked, to

allow hot air to flow out of the appliance. Covering the vents prevents heat from dissipating out of the appliance, which

will cause the chassis to overheat and then shut down.

Installation Guidelines

This article provides general safety standards and warnings relating to installing or connecting a CSG300 series

appliance.

General Safety Guidelines

Caution: Before installing or removing a CSG300 series appliance, ensure that the appliance chassis is electrically

connected to ground. When you are installing or removing an appliance, ensure that you wear an ESD grounding wrist

strap. To put the ESD grounding strap on properly, attach it to an ESD point and then place the other end of the strap

https://docs.versa-networks.com/Versa_Internal/WIP/Antony/Cloud_Services_Gateway_300_Series

Updated: Tue, 01 Dec 2020 03:50:36 GMT