Product Card

Table Of Contents

to issuing the shutdown now command from the operating system shell.

• If you press and hold the button for 10 seconds or more, the power for the appliance turns off and the appliance

shuts down.

Reset Button

The Reset button on the rear panel of a CSG300 series appliance resets the appliance. The reset functionality depends

on the number of times you press the button within a span of 30 seconds, as described in Table 3.

The Reset button is recessed so that it is not accidentally pressed while the appliance is operational.

To press the Reset button, use a sharp, narrow tool.

Table 3: Reset Button Press Behavior

Number

of Presses Behavior

2 Reset the appliance to the factory-default snapshot.

4 Reset the appliance to the branch prestaging configuration.

6 Reset the appliance to the branch staging configuration.

8 Reset the appliance to branch post-staging configuration.

You can reset the appliance to the factory-default configuration by issuing the request system reset CLI command.

Reset the Appliance to the Factory-Default Configuration from the CLI

You can reset the appliance to the factory-default configuration from the CLI. You can connect to the appliance through

the serial console port or by using SSH.

The factory default reset procedure may take up to 20 minutes to complete. Do not power off the appliance during this

time.

To reset an appliance to the factory default configuration:

1. To connect to the appliance through the serial console port, see Configure a Management Console to Connect to a

CSG300 Series Appliance.

2. Log in to the appliance CLI using the username "admin" and the password "versa123".

Note: To connect to the appliance using SSH, connect your PC to the management port of the appliance. For the

port mapping on the CSG700 series appliance, see Interface Numbering. The management port has the default

static IP address 10.10.10.10/24. Configure the PC IP address to any IP from this segment, for example,

10.10.10.1/24. Open an SSH session to the appliance using its IP address, 10.10.10.10.

https://docs.versa-networks.com/Versa_Internal/WIP/Antony/Cloud_Services_Gateway_300_Series

Updated: Tue, 01 Dec 2020 03:50:36 GMT