Product Card
Table Of Contents
- Cloud Services Gateway 300 Series
- At a Glance
- CSG300 Appliance Models
- Chassis Views
- CSG300 Series Appliance Specifications
- Chassis Specifications
- CSG300 Series Appliance SKUs
- Regulatory Compliance
- Certifications
- Export Control Information
- Front and Rear Panel Components
- Front Panel
- Rear Panel
- Additional Information
- Network Interface Card Modules
- LTE Modem Module
- Embedded WiFi Module
- Interface Numbering
- Power Supply and Airflow
- AC Power Supply
- Airflow Requirements
- Installation Guidelines
- General Safety Guidelines
- Federal Communication Commission Interference Statement
- Prepare the Site for Installation
- Site Preparation Guidelines
- Environmental Requirements
- Rack Requirements
- Airflow Requirements
- Install a CSG300 Series Appliance
- Unpack a CSG300 Series Appliance
- Packing List for a CSG300 Series Appliance
- Mount a CSG355 or CSG365 Appliance in a Rack
- Connect a CSG300 Series Appliance
- Step 1: Connect Earth Ground to a CSG300 Series Appliance
- Step 2: Connect AC Power to a CSG300 Series Appliance
- Step 3: Configure a Management Console to Connect to a CSG300 Series Appliance
- Step 4: Connect a CSG300 Series Appliance to a Management Console
LED Color Status
Power Green
• Off: Appliance is not powered on.
• Green: Appliance is powered on.
Status
Green,
Red
• Off: Appliance hardware is up, but there is a problem with the software.
• Solid green: Appliance is up and running.
• Blinking green: Appliance is in the process of booting up.
• Red: Major error condition exists in the system or there is a corrupt software
configuration.
• Blinking red: System crash, overheating, or a persistent error condition exists.
Wireless White
• Off: Wireless module not installed.
• Solid white: Wireless module is up and running.
• Blinking white: Wireless module is booting up or there is traffic on the wireless module.
LTE White
• Off: LTE module not installed, or there is a major hardware problem.
• Solid white: LTE module is up and running.
• Blinking white: LTE module is booting up or there is traffic on the LTE module.
SIM Card Slots
The rear panel of a CSG300 series appliance has two nano-SIM card slots. If you subscribe to a single wireless service,
use the SIM 1 slot to install the LTE device. If you subscribe to dual wireless service, use both the SIM 1 and SIM 2 slots
to activate the LTE devices.
Note: It is strongly recommended that you use only preactivated SIMs in the SIM card slots.
Power Button
The Power button on the rear panel of a CSG300 series appliance turns the power on and off.
To turn the power on, press and immediately release the Power button when the appliance is off.
To turn the power off, press the Power button when the appliance is on, as follows:
• If you press and immediately release the button, the appliance does a graceful software shutdown that is equivalent
https://docs.versa-networks.com/Versa_Internal/WIP/Antony/Cloud_Services_Gateway_300_Series
Updated: Tue, 01 Dec 2020 03:50:36 GMT
Copyright © 2020, Versa Networks, Inc.
11