Installation Instructions

Components Quantity

CSG300 series appliance chassis 1

AC power adapter 1

Power cable 1

Cat 6 cable 1

Cat 5e cable 1

LTE antenna (included with LTE module only)

2 for single LTE module

4 for dual LTE module

WiFi antenna (included with WiFi module only) 2

GPS antenna 1

Rack-mounting ears 2

Screws for mounting ears

6—M4x8 mm #6 Torque: 1.18+/-0.05 N.M.

4—#12-24, 12.7 mm Torque: 3.2+/-0.05 N.M.

Mount a CSG300 Series Appliance in a Rack

You can mount a CSG300 series appliance in a four-post 19-inch rack. Two people are required to mount the appliance.

To mount the appliance, ensure that you have the following tools:

• Number 2 Phillips (+) screwdriver

• Tape measure

To mount a CSG300 series appliance in a four-post 19-inch rack:

1. Place the appliance chassis on a flat, stable surface.

2. Check the internal dimensions of the rack with a tape measure. The appliance is 22 cm wide (about 8.6 inches

wide) and must fit within the mounting posts.

3. Allow a minimum of 0.5 RU space above the appliance for airflow, to allow hot air to flow out. However, it is

recommended that you allow 1 RU space above the appliance.

Figure 2: Space a CSG300 Series Appliance when Rack Mounting

https://docs.versa-networks.com/Hardware/Cloud_Services_Gateway_300_Series/Planning_and_Installation/03_Install_a_CS…

Updated: Wed, 01 Apr 2020 19:02:26 GMT