A S S EMBLY I N S T R U C TIO N S Fun 2DA & 2DM Please read thoroughly before assembly
1 IMPORTANT! ALWAYS TURN OFF THE ELECTRICAL CURRENT BEFORE INSTALLLING ANY FIXTURE! BE SURE THAT THE CEILING OUTLET BOX IS MOUNTED SO THAT IT CAN CARRY THE WEIGHT OF THE ENTIRE LAMP! THERE MUST BE NO WEIGHT ON THE ELECTRIC WIRES!
2 IMPORTANT! Screw a strong hook firmly into a stable ceiling. Hang the lamp fixture from the hook Adjust the black hanging wire, which MUST support the total weight of the lamp.
3 MOUNTING THE METAL FRAME After you have mounted the ceiling canopy to the ceiling please mount the metal frame together with the cord (incl. socket). Screw the metal tubes firmly together! Now you are ready to hang the plates at the metal frame.
4 INNER RIM OUTER RIM INNER RIM OUTER RIM Mount plates from box with 6 pcs. Box is marked “INNER RIM”. Mount plates from box with 4 pcs. Box is marked “OUTER RIM”. Please note: The chains in the box are not the same length, so it is important that you alternate between the two lengths. Please note: The chains in the box are not the same length, so it is important that you alternate between the two lengths.
5 HOW TO CLEAN: Clean with a soft cloth, warm water and a mild detergent. Do NOT use any abrasive materials.
Egeskovvej 29 8700 Horsens Denmark www.verpan.com info@verpan.
