Installation Instructions

1414
2
OPERATIONS TO BE EXECUTED FOR THE REPLACEMENT OF
THE INJECTOR OF THE BROIL BURNER
• Gently unlock, from the burner, the safety valve probe “V” and the ignition electrode
“E” (as indicated in g. 2.9). Take care not to damage the probe and the ignition
electrode.
• Unscrew and remove the burner securing screw “A” (g. 2.9).
• Withdraw the burner as shown in gure 2.10.
• Using a 7 mm box spanner, unscrew the injector (indicated by the arrow in g. 2.10)
and replace it with a new one selected in accordance with the “Injectors table”.
• Then replace the burner and the other components repeating the above steps in
reverse order.
 IMPORTANT: Pay special attention to replace correctly the safety valve probe
“V” and the ignition electrode “E” as per gure 2.9. Check the correct operation
of the safety valve and the ignition electrode.
Fig. 2.9
E
V
Anchorage
clip
Anchorage
clip
E
V
A
Fig. 2.10