Installation Guide

9
PRESSURE REGULATOR INSTALLATION
Arrow
STEP 1
Mountthe3/8”NPT(conical)maleconnectortothepressureregulator
and tighten by using a wrench.
Do not over tighten the connector.
Over tightening may crack regulator.
STEP 2
Assemblethe3/8”NPTconnector+pressureregulatorgrouptothemanifoldinterposingthegasketsupplied.Theregulator
cover must be oriented toward the back of the cabinet.
IMPORTANT: use two spanners to tighten the connection.
Regulator cover
Fig.2.2
Fig.2.3
2