Installation Guide

6
Oven dimensions (fig.1.1):
• width=29”11/16(754mm)
• depth=20”9/32(515mm)
• depth=22”7/16(570mm)withgaspressureregulatorfitted
• height=27”1/64(686mm)
• ovenframedepth=63/64”(25mm)
Cutout dimensions (fig.1.2):
• width=28”1/2(724mm)
• depth=23”1/2(597mm)minimumfromfrontcornerofcutout
• height=27”3/16(690)
IMPORTANT NOTE: THE BOTTOM OF CUTOUT SHALL BE
AT LEAST 14” 7/8 (378 mm) FROM THEFLOOR. DO NOT
INSTALL THE OVEN BENEATH THE WORK COUNTER.
Ontheloverside,theovenmustlayonasupportstandingthe
ovenweight.OvensupportsurfaceMUSTbesolid.
Allopeningsinthewallorfloorwheretheovenistobeinstalled
MUST be sealed. Oven location should be away from strong
draftareas,suchaswindows,doorsandstrongheatingvents.
For SAFETY CONSIDERATIONS the oven SHALL BE
FASTENEDtothecabinetwithfour(4)SUITABLEscrews(not
supplied with the unit) through the holes in the trim (see fig.
1.4).Theunitshouldbeleveledproperlybeforebeingsecured
tothecabinet.
INSTALLATION TO THE CABINET
1
installation
20” 9/32 (515 mm)
29” 11/16 (754 mm)
28” 1/4 (717 mm)
22” 7/16 (570 mm)
63/64” (25 mm)
63/64” (25 mm)
27” 1/64 (686 mm)
26” 1/32 (661 mm)
Fig.1.1
1 2
Click
Click
AFTERFIXINGTHEOVENTOTHECABINET,
FIT THE LOWER TRIM (SUPPLIED WITH THE APPLIANCE)
AS INDICATED IN FIGURE BELOW