Installation Guide

14
2
OPERATIONS TO BE EXECUTED FOR THE REPLACEMENT OF
THE INJECTOR OF THE BROIL BURNER
• Gentlyunlock,fromtheburner,thesafetyvalveprobe“V”andtheignitionelectrode
“E” (as indicated in g. 2.9). Take care not to damage the probe and the ignition
electrode.
• Unscrewandremovetheburnersecuringscrew“A”(g.2.9).
• Withdrawtheburnerasshowningure2.10.
• Usinga7mmboxspanner,unscrewtheinjector(indicatedbythearrowing.2.10)
andreplaceitwithanewoneselectedinaccordancewiththe“Injectorstable”.
• Then replace the burner and the other components repeating the above steps in
reverseorder.
 IMPORTANT:Payspecialattentiontoreplacecorrectlythesafetyvalveprobe
“V”andtheignitionelectrode“E”aspergure2.9.Checkthecorrectoperation
ofthesafetyvalveandtheignitionelectrode.
Fig. 2.9
E
V
Anchorage
clip
Anchorage
clip
E
V
A
Fig. 2.10