Installation Guide

13
2
OPERATIONS TO BE EXECUTED FOR THE REPLACEMENT OF
THE INJECTOR OF THE OVEN BURNER
• Liftandremovethelowerpanelinsidetheoven.
• Gentlyunlock,fromtheburner,thesafetyvalveprobe“V”andtheignitionelectrode
“E” (as indicated in g. 2.7). Take care not to damage the probe and the ignition
electrode.
• Unscrewandremovetheburnersecuringscrews“A”(g.2.7).
• Withdrawtheburnerasshowningure2.8.
• Usinga7mmboxspanner,unscrewtheinjector(indicatedbythearrowing.2.8)
andreplaceitwithanewoneselectedinaccordancewiththe“Injectorstable”.
• Then replace the burner and the other components repeating the above steps in
reverseorder.
 IMPORTANT:Payspecialattentiontoreplacecorrectlythesafetyvalveprobe
“V”andtheignitionelectrode“E”aspergure2.7.Checkthecorrectoperation
ofthesafetyvalveandtheignitionelectrode.
E
V
Anchorage
clip
Anchorage
clip
E
V
A
Fig. 2.7
Fig. 2.8