Owner Manual

manufacturer’s instructions.
Note: Make sure all six sides - front, back, edges, top and bottom - receive the same
uniform coverage.
Step #6
Apply oil based stain and allow to dry per manufacturer’s instructions.
Note: Make sure all six sides - front, back, edges, top and bottom - receive the same
uniform coverage.
Step #7
Apply polyurethane top coat and allow to dry per manufacturer’s instructions.
Note: Make sure all six sides - front, back, edges, top and bottom - receive the same
uniform coverage.
Step #8
Lightly sand (320 Grit Sandpaper) and wipe clean with tack cloth per manufacturer’s
instructions before applying second coat.
Step #9
Apply second coat of polyurethane and allow to dry per manufacturer’s instructions
.
Note: Make sure all six sides - front, back, edges, top and bottom - receive the same
uniform coverage.
Step #10
Allow the polyurethane to dry completely before unmasking and installing hardware.