Operating instructions

Instal. GAL
A
®
4 / 40
VERO DESIGN NV © all rights reserved [phone]
Installation instructions Operating instructions
G
A
L
A
Installation must be performed by a licensed plumber or gas fitter. Installation must comply
with manufacturer’s installation instructions and national and regional instructions.
If you have any doubts, consult your local energy provider.
Before installation, determine if the information on the CE label matches the type of gas and
gaspressure for your region. Conversion from natural gas to propane (or vice versa) is not
recommended in a more advanced phase.
GALA can be connected to a new or existing chimney vent, using the diameter as
recommended, with natural draft.
GALA can also be connected concentric.
Fresh air supply for combustion from outside or basement. The appliance can be installed in a
normally ventilated house. An extra ventilation system is not necessary.
Vero Design nv is not responsible for manipulated appliances !
Only use the stones which are delivered with the appliance. Place the stones over the burner and
bottom of the fireplace. Make sure there are no stones placed on or against the pilot flame.
Keep flammable materials away from the fireplace (1 m).
Maintenance must be in accordance with regional guidelines, laws and regulations. Although have a
qualified service technician check the appliance once a year. Have your chimney swept once a year
by a qualified chimney-sweeper.
Children or unauthorised persons can only be in the vicinity of the appliance under supervision.
CAUTION !