Operating instructions

Instal. GAL
A
®
14 / 40
VERO DESIGN NV © all rights reserved [phone]
Installation instructions Operating instructions
G
A
L
A
Air flow
Combustion air
Fresh air, combustion air, primary air, has to be brought into the unit. This is possible from a different
place under the unit or via a tube from an outside wall.
1 or 2 col air vent
CONNECT !
Air from the room will go
into the convection
chamber and warms up
Convection air system
When the convection air system is not wanted, close the openings on the unit with insulation material.
This is how the convection air system has to be connected :
1 or 2 warm air vent
CONNECT !
Warm air will get into the room
again via the vent
!
Supply the unit
with combustion air from underneath, do not connect.
The air will find ist way into the burner by several openings.