Operating instructions

20300293
29
Resolution Direct Vent Gas Fireplace


Burner Grate Assembly
LG753
VHLDV burner grate
LG753
LG754
VHLDV right log #1
LG754
Log #1
LG755
Left front log #2
Log #2
LG755
1. Hold Log #1 with the at side of the log
parallel to the right brick. Place the log on
the pin on the right rear of the log bracket.
Make sure to t the notch in the front of
the log over the fettle. There should be a
slight gap (approximately 3/8") between
the log and the brick.
2. Hold Log #2 in your left hand with
the thick end to the left. Position the
log on the left front just behind the
fettle and seat the log on the two
(2) pins on the left fettle bracket.
The right end of the log should rest
along the back edge of the front
burner.
Figure 37
Figure 36
Figure 35