User`s manual
30005801
9
Care & Maintenance
It may be necessary to adjust the burners periodically, to com-
pensate for variables in gas characteristics. If you notice the
burner ame pattern is irregular (Refer to Page 14, Figures 9a,
9b & 9c), it may be necessary to adjust the air shutter opening
at the front of the venturi tubes.
•
The shutters are accessible under the control panel at the
front of the Grill. (Fig. 19)
•
Use a screwdriver to loosen the locking screws. Open the
shutter just enough to achieve the desired soft, blue ames.
Make adjustments in small increments and allow the burner
to come up to operating temperature (10 min.) before mak-
ing further adjustments.
Always allow sufcient time for the Grill to cool to a safe tem-
perature before handling or cleaning any of its components.
If burners are removed for cleaning or adjustment, always
conrm that they have been reinstalled correctly over the
valve outlets. (Fig. 0) The valves should extend into the
burner venturis 1/4” minimum.
Similar adjustment can be made to Rotisserie and/or
Side Burners, if so equipped.
"
ADJUSTAIRSHUTTER
Loosen the
Locking Screw
Turn Shutter
Clockwise to Open
B139
Figure 19
"
6ENTURIAIRSHUTTER
1/4” Minimum
B140
Figure 20
Valve Outlet
NOTICE
NOTICE