Operating instructions

12
ODGSR Series Outdoor Gas Fireplace
20007114
Optional Weather Enclosure
Anoptionalweatherenclosureisavailabletoprotectthe
burnerwhennotinuse.
CAUTION:Donotusetheweatherenclosureif
theunithasglassdoorsinstalled.
Installation Instructions
1. TurntheunitOFFandallowtocool.
2. Grabtheweatherenclosurebythehandle(s).
3. Slidethetopoftheweatherenclosureupbetweenthe
backofthesurroundtopandthescreenrail.(Fig.19)
4. Pushthebottomoftheweatherenclosureintothere-
boxjustenoughtoclearthevalveaccesscoverandset
down.(Fig.20)
KT457
place we top
4/1/04 djt
KT457
Fig. 19Placetopofweatherenclosurebetweensurroundtop
andscreenrail.
SurroundTop
WeatherEnclosure
ScreenRail
KT458
place we bottom
4/1/04 djt
Screen
HearthBrick
ValveAccessCover
KT458
Fig. 20Pushbottomofweatherenclosureintorebox.
Optional Stainless Steel Hood
Anoptionalstainlesssteelhoodisavailableforboththe
ODGSR36AandODGSR42A.
NOTE: The stainless steel hood may NOT be
used when the optional glass doors are in-
stalled.
Installation Instructions:
1. Turntheunitoffandallowtocool.
2. Placethehoodsothe2B⁄,"(67mm)slotclearsthesen-
sor plate located under the replace opening onthe
topleftside.(Fig.21)
3. Securethehoodtotheunitusingthethree(3)slotsin
thehoodandthepilotholesintheunitwiththestain-
lesssteelsheetmetalscrewsprovided.(Fig.21)
4. Align the sides of thehood sothe pilotholes onthe
rightandleftsidesoftheunitareexposedthroughthe
slots on the ends of the hood. Secure using the re-
mainingstainlesssteelsheetmetalscrews.(Fig.21)
&0
/$'32HOOD

Stainless
SteelHood
Stainless
SteelSheet
MetalScrews
(5)
SensorPlateSlot
FP1635
Fig. 21Securestainlesssteelhoodwithve(5)sheetmetal
screws.