Operating instructions

4
75D0004
MLDV Series Gas Fireplace


1.  Read the safety information above.
. This appliance is equipped with an ignition device which automatically lights the burner. Do not try to
light the burner by hand.
3. With ve (5) minutes to clear out any gas. Then smell for gas, including near the oor. If you smell gas,
 Follow "B" in the safety information on page 38. If you do not smell gas, go to next step.
4. Press the master switch to the "ON" (-) position. Within eight (8) seconds it will beep once. This indi-
cates the system is ready.
5. Press "ON " button. Sparker will spark and pilot ame will light.
6. Once pilot ame is established, the main burner ame will light automatically.
7. If the pilot will not stay lit after several tries, turn the master switch to "OFF" and call your service
technician or gas supplier.

1. Turn master switch to "OFF".
. Turn off all electrical power to the appliance if service is to be performed.
FP1913
Switch box
8/08

ON
Master
Switch
OFF
FP1914
Pilot w sparker
8/08

