Operating instructions

10003929

A3) RHEFA and RHEFP TRIMS

Glass

Frame

Louvre

Note:

Position brass trim top as

shown (small end up)

to prevent heat discolouration

Fig. 27

Fig. 28

1. Remove the front glass (see "Glass Frame Re-

moval" section).

2. Install support window trim channel, top and

bottom brass trim by using the shortest black

screw. (Fig. 43 & 44).

TRIM ASSEMBLY

3. Install bottom decorative plate by simply sliding it

under the unit floor. No fastening is required for

this installation (See Fig. 45). Be sure to remove

protective cover.

4. Install the bottom louvre assembly by fastening the

hinges with four screws to the pre-punched holes

in the cabinet.

5. Re-install the front glass.

6. Install the top louvre by using the hooks to hang it

in place.

KEY DESCRIPTION RHEFA RHEFP

1 Trim Window Top/Bottom 52624-AB 52624-PB

2 Plate Decorative Bottom 17597-AB 17597-PB

3 Top Louvre Assembly 57905 57905

4 Bottom Louvre Assembly 57906 57906

5 Hinge 52356 52356

6 Fateners Package (Not Shown) 57916 57916

ALL repair parts will be available from your local dealer.

When ordering, always give the following information: Model and serial number, part description with finish and part number;

TRIM REPLACEMENT PARTS LIST

Fig. 29

BOTTOM

DECORATIVE PLATE

TRIM-TOP

GLASS FRAME

TRIM-BOTTOM

screws