Operating instructions
Intrepid® Direct Vent - Rear Vent Gas Heater
20012761
Fuel Conversion Instructions
WARNING! This conversion kit shall be installed
by a qualied service agency in accordance with
the manufacturer’s instructions and all applicable
codes and requirements of the authority having ju-
risdiction. If the information in these instructions is
not followed exactly, a re, explosion or production
of carbon monoxide may result causing property
damage, personal injury or loss of life. The qualied
service agency is responsible for the proper instal-
lation of this kit. The installation is not proper and
complete until the operation of the converted appli-
ance is checked as specied in the manufacturer’s
instructions supplied with the kit.
CAUTION: The gas supply shall be shut off prior to
disconnecting the electrical power, before proceed-
ing with the conversion.
ST226b
attach gas line
6/07 djt
Fig. 67
Conversion Precautions
Conversion Procedure
Valve Conversion
WARNING: Do
not overtighten
the screw. Rec-
ommended to
grip the wrench
by the short
side.
WARNING: Check that also the pilot and
main burner injectors are appropriate for
the gas type.
(
)
,
/
(
)
,
/
LP Configuration
Natural Gas
Configuration
CO141
O-ring configuration
6/07
Figure 72
(
)
,
/
#/
REMOVESCREW
Figure 68
(
)
,
/
#/
!LLENWRENCH
Figure
69
(
)
,
/
#/
TURNSCREW
Figure 70
(
)
,
/
#/
!LLENWRENCH
Figure 71
Pilot Orice Conversion
Pilot Type 1
NOTE: