Operating instructions
Intrepid® Direct Vent - Rear Vent Gas Heater
20012761
Burner Information
THIS APPLIANCE SHOULD BE CONNECTED TO THE
GAS SUPPLY ONLY BY A QUALIFIED GAS SERVICE
TECHNICIAN. FOLLOW ALL LOCAL CODES.
THERE MUST BE A GAS SHUT-OFF BETWEEN THE
STOVE AND THE SUPPLY.
Complete the Assembly
Install ON/OFF Switch
ST1120
switch housing
Fig. 55
Install the Front Plate
ST228
attach switch
wires to valve
12/99
PILOT
ADJ
TP
TH
TPTH
Fig. 56
ST967
Intrepid install front
7/07
INTREPID
Fig. 57
Thermostat
Wire / Gauge Maximum Run
Thermostat Connection
(Optional) R Models Only
Use only a thermostat rated for 500 - 750 millivolts.
This completes assembly of the Intrepid stove.