Specifications

DFS Series Vent Free Fireplace
71D0532 29



If you are installing the forced air kit, Model BLOTMC, see
the installation instructions provided with the kit for electrical
wiring requirements, or the blower installation section. The
rebox must be connected to main power supply at time
of rebox installation. The blower must be installed prior
to the installation of the unvented heater. The electrical
connections must be made before the rebox is framed
and enclosed in the nished walls.

Optional brass or pewter trim kits can be used in place of
the factory supplied black trim.

Optional Tavern Brown and Cottage Red rebrick kits can
be installed. Refer to installation instructions provided
with kit.

   
     




 
Wall Thermostat Kit WT
Remote - On/Off RCB, RCBE, RCM, WMTD, TMSC
Thermostat Remote RCST, RCSTE, RCT, WWTD, TSST
Remote Receiver Cover Ember RRCE
Remote Receiver Cover Metal RRCM
Cast Iron Grate and Andirons CIGA (Not available for DFS32)
Rock Wool - Bag TPB18-RW