Specifications

4
Vermont Castings Intrepid
®
III Multi-Fuel
30003891



1. Carefully lift up and remove the three front grate
bars from the retaining channel.
. Lift up and remove the lower front grate bar.
3T
FRONTGRATE

Front
Grates
ST899
 Remove the front grate bars.
3. Remove the two side firebricks.
4. Remove the left and right horizontal inserts.
5. Carefully lift up and simultaneously remove the right
side of the three bottom grates along with the shaker
linkage. These are supported at the right side by
open retaining slots in the right vertical grate insert.
6. Remove the left and right vertical grate inserts. Note
that it may be necessary to gently tap these with a
soft faced mallet to break out any residual beads
34
REMOVESIDEFIREBRICKS

ST90
 Remove side firebricks.
34
(ORIZONTALINSERTS

ST903
 Remove left and right horizontal inserts.
34
REMOVEBOTTOMGRATES

ST904
 Remove right side bottom grate.
of stove cement left from the original factory stove
assembly that may be holding them in place. 




3T
REMOVEVERTGRATESINSERTS

ST905
 Remove vertical grate inserts.