User manual

16
Connections
Figure 10: The Action Filter 4’s rear
INPUT
Input jacks L and R serve to connect the audio source to be processed. The connections are available
as 1/4“-TS- as well as RCA-connectors. Both inputs can be used at the same time but you won’t be
able listening to both input pair’s signal simultaneously. Both types serve to facilitate connections
in the corresponding setup so there is no need to use adapters which would introduce a possible
source for problems. With both input types being connected, priority is given to the jack-inputs.
OUTPUT
Output jacks L and R serve to connect to a mixing console, an audio-interface or an amplifier.
Unlike the inputs, the jack- and RCA-outputs can be used in parallel.
POWER - 12V DC / 1A
Connect the provided power-supply here. The cable may be fixed with the adjacent clip to avoid
unwanted pulling out. A real LIVE-saver, isn’t it!