User manual

Doepfer: A-150/A-151/A-152 Switches, A-160 Clock Divider, A-161
Clock Sequencer
Intellijel Designs: µStep-sequencer
Make Noise: Brains
The Harvest Man: Stillson Hammer
... as well as Drum/Percussion modules by MFB, Analogue Solutions,
Tip Top Audio, Cwejman
Soft Edges
Jumping value changes are typical for sample & hold modulations. In
some cases, these changes are too abrupt. Here, the use of a slew-limiter
(e.g. Doepfer A-170, Analogue Systems RS-350) can be a good corrective
when patched to the WAVE output. Value jumps are now attenuated and
with careful use, you can even achieve an organic sounding vibrato
sounding more natural than a typical sine wave LFO.
A slew-limiter is also useful in combination with square waves. It turns
the curve into a trapezoid wave form which is advantageous when creat-
ing tremolo effects.
Technical Data
Dimensions: 3 rack units/ 34HP
Power consumption: max. 100 mA
Connections (3.5mm TS)
WAVE OUT: -5 to +5 volts
Trigger impulses (CLK OUT, TRIGGER): 50ms, 12V
CV IN: -5 to +5 volts
min. input voltage RESET: +4V
Frequency range: 0,05 Hz - 100 Hz
Owner's Manual VERMONA Retroverb Lancet
- 17 -