Wireless DSL Gateway GT704WGB User Manual
Contents Wireless DSL Gateway User Manual 1 Introduction 1.0 1.1 1.2 1.3 1.4 Introduction System Requirements Features Important Safety Instructions Getting to Know the Gateway 2 Performing a Quick Setup 2.0 2.1 2.2 Introduction Accessing Quick Setup Screens Changing the Password 3 Viewing the Gateway’s Status 3.0 3.1 3.2 Introduction Broadband Connection Status Network Status 4 Configuring Wireless Settings 4.0 4.1 4.2 4.3 4.4 4.
Contents Wireless DSL Gateway User Manual (con’t) 5 Configuring Advanced Settings 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 5.11 5.12 5.13 Introduction Accessing Advanced Settings DSL Settings DHCP Settings LAN IP Address WAN IP Address QoS Settings Remote Management Dynamic Routing Static Routing UPnP (Universal Plug and Play) USB Port Detection Time Zone Remote Syslog Capture 6 Configuring Security Settings 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.
Contents Wireless DSL Gateway User Manual (con’t) 8 Configuring Utilities 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 Introduction Accessing Utilities Restore Default Settings Upgrade Firmware Multiple PVC Web Activity Log System Log OAM Ping Test Ping Test Reboot 9 Troubleshooting 9.0 9.1 9.2 Introduction Troubleshooting Frequently Asked Questions A Reference A.0 Introduction A.1 Locationg Computer Information A.2 Locating Windows Operating System Files B Setting Up Static IP B.0 B.1 B.2 B.3 B.
Contents Wireless DSL Gateway User Manual (con’t) C Computer Security C.0 C.1 C.2 C.3 C.4 C.5 Introduction Overview Comparing DSL Service with a Dial-Up Modem Gateway Security Computer Security Electronic Security D Specifications D.0 D.1 D.2 D.3 D.4 Introduction General Wireless Operating Range LED Indicators Environmental E Glossary E.0 E.1 Introduction Glossary F Service Acronyms F.0 F.
1 1.0 1.1 1.2 1.3 1.4 Introduction System Requirements Features Important Safety Instructions Getting to Know the Gateway Introduction 5 © 2008 Verizon. All Rights Reserved.
The Gateway is the simplest way to connect computers to a high-speed broadband connection. This easy-to-use product is perfect for the home office or small business. If you want to take your computing to the next level, the Wireless DSL Gateway is sure to be one of the keys to your success. 6 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 1.1 System Requirements The Gateway must be used with the following systems and software: s Active DSL service s Computer with an 10 Mbps or 10/100 Mbps Ethernet connection, or USB connection s Microsoft Windows 98 Second Edition (SE), Millennium Edition (Me), NT 4.0, 2000, XP, Vista Mac OS 7.1+, 8.0+, 9.0+, OS X+ Note: USB LAN port is not supported with Microsoft Windows NT 4.0, Windows Vista 64-bit, or Mac OS. s Internet Explorer 4.0 or higher (5.
1 Introduction 1.3 Important Safety Instructions s RIP-1, RIP-2, and static routing protocol support s Built-in NAT, DHCP server s DNS relay support s PAP/CHAP authentication, administrative passwords through Telnet s 64-, 128-, and 256-bit WEP/WPA wireless LAN security s IEEE 802.3 Ethernet standard compliance s 10/100 Base-T Ethernet ports (4) s Fast Ethernet flow control support s Web-based configuration setup s FTP firmware upgradeable s Web download support s 802.11b/g support s WPS support 1.
Wireless DSL Gateway User Manual 10/16/08 1.3a Telephone Line Cord Caution To reduce the risk of fire, use only No. 26 AWG or larger (e.g., 24 AWG) UL Listed or CSA Certified Telecommunication Line Cord. 1.4 Getting to Know the Gateway This section contains a quick description of the Gateway’s lights, ports, etc. The Gateway has several indicator lights (LEDs) and a button on its front panel, and a series of ports and switches on its rear panel. 1.
1 Introduction 1.4 Getting to Know the Gateway Internet Light When the Internet light glows steadily, the Gateway is connected to the DSL provider. When it flashes, the Gateway’s built-in DSL modem is training for the DSL service. Ethernet Lights The Ethernet lights illuminate when the Gateway is connected to one or more of its yellow Ethernet ports. USB Light The USB light illuminates when the Gateway is connected via its USB port.
Wireless DSL Gateway User Manual 10/16/08 1.4b Rear Panel The rear panel of the Gateway contains seven ports (Ethernet [4], Phone, USB, and Power), as well as Reset and Power switches. Ethernet Ports The Ethernet ports are used to connect computers to the Gateway via Ethernet cable. The Ethernet ports are 10/100 Mbps auto-sensing ports, and either a straightthrough or crossover Ethernet cable can be used when connecting to the ports.
1 Introduction 1.4 Getting to Know the Gateway Power Port The Power port is used to connect the Power cord to the Gateway. Warning: Do not unplug the Power cord from the Gateway during the reset process. Doing so may result in permanent damage to the Gateway. Power Switch The Power switch is used to power the Gateway on and off. 12 © 2008 Verizon. All Rights Reserved.
2 2.0 2.1 2.2 Introduction Accessing Quick Setup Screens Changing the Password Performing a Quick Setup 13 © 2008 Verizon. All Rights Reserved.
This chapter is a guide through a quick set up of the Gateway, including how to connect the Gateway to the ISP and changing the Gateway’s password. 14 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 2.1 Accessing Quick Setup Screens To complete the quick setup, have the Welcome Letter or ISP Worksheet handy. If the document is not available, contact the ISP immediately. To access the Quick Setup screens: 1. Open a Web browser. In the “Address” text box, type: http://192.168.1.1 then press Enter on the keyboard. 2. The “Home” screen appears. Click Quick Setup. 15 © 2008 Verizon. All Rights Reserved.
2 Quick Setup 2.1 Accessing Quick Setup Screens 3. A login window appears. Enter the user name and password in the appropriate text boxes, then click OK. Note: The default user name is “admin.” The default password is “password.” 4. Follow the instructions in the “Welcome to the Quick Setup” screen, then click Next. 5. At the top of the next window, select PPPoE or DHCP. 16 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 6. If PPPoE was selected in step 5, the default user name and password are entered in the appropriate text boxes.If “DHCP” was selected, go to step 8. 7. If PPPoE was selected in step 5, select the IP type (“Dynamic IP-DHCP [Default]” or “Single Static IP Address”). If Single Static IP Address was selected, enter the address in the appropriate text box. 8. Optional - Select the DNS type (“Dynamic DNS Addresses [Default]” or “Static DNS Addresses”).
2 Quick Setup 2.2 Changing the Password 10. Read the instructions on the next screen. The Gateway is successfully configured. The Power light flashes rapidly while the Gateway restarts, then glows steadily green when fully operational. The Internet light will also glow steadily green. The Gateway is now configured and users can start surfing the Internet. If an error appears, stating the Web browser was unable to connect to the Internet, check the configuration settings.
Wireless DSL Gateway User Manual 10/16/08 3. The “Change Admin Username/Password” screen appears. Enter a new Username in the “Admin User Name” text boxt, then enter a new password in the “Admin Password” text box. Make sure to write down the user name and password and keep it in a secure location. They will be needed to access the Gateway’s Web Configuration screens in the future. 4. Click Apply at the bottom of the screen. 5. Read the instructions on the next screen.
3 3.0 3.1 3.2 Introduction Broadband Connection Status Network Status Viewing the Gateway’s Status 20 © 2008 Verizon. All Rights Reserved.
After configuring the Gateway, the Gateway’s connection and network status can be viewed. The Internet connection status is viewed in the “Broadband Connection Status” screen, while the network status is viewed in the “My Network” screen. 21 © 2008 Verizon. All Rights Reserved.
3 Viewing Status 3.1 Broadband Connection Status 3.1 Broadband Connection Status To view the Gateway’s connection statistics, select Status in the Home screen. The “Broadband Connection Status” screen appears. There are three sections in this screen: General Statistics, PPP Status, and DSL Status. Note: No settings (other than connecting or disconnecting from the Internet by clicking on Connect or Disconnect) can be changed from the Broadband Connection Status screen. 3.
Wireless DSL Gateway User Manual 10/16/08 3.1b PPP Status The middle section of the Broadband Connection Status screen displays the status of the Gateway’s PPP connection, including user name, authentication failures, and packets sent and received. 23 © 2008 Verizon. All Rights Reserved.
3 Viewing Status 3.1 Broadband Connection Status 3.1c DSL Status The bottom section of the Broadband Connection Status screen displays the status of the Gateway’s DSL connection, including mode settings, connection status, and number of discarded packets. Click Reset to refresh all statistics on this screen In the menu on the left side of the Broadband Connection Status screen, there are two other options available to view: NAT Table and Routing Table. Click to generate the option of choice.
Wireless DSL Gateway User Manual 10/16/08 NAT Table Selecting NAT Table generates the “NAT Table” screen. This screen displays an overview of the current list of open connections through NAT (Network Address Translation) the Gateway supports between the networked computers and the Internet. Routing Table Selecting Routing Table generates the “Routing Table” screen. This screen displays the an overview of the Gateway’s network routes. 25 © 2008 Verizon. All Rights Reserved.
3 Viewing Status 3.2 Network Status 3.2 Network Status To view the Gateway’s network status, select My Network in the “Home” screen. The “My Network” screen appears, listing all devices connected to the network. From this screen, various settings can be accessed, including Website blocking, Schedule Rules, and Enable Application. To view the network status of a particular device, click View Device Details for the device. An overview of the device’s network status appears. 26 © 2008 Verizon.
4 4.0 4.1 4.2 4.3 4.4 4.5 Introduction Accessing Wireless Setup Basic Wireless Setup Wireless Advanced Settings Wireless Status WPS (WiFi Protected Setup) Configuring Wireless Settings 27 © 2008 Verizon. All Rights Reserved.
This chapter explains how to set up the Gateway’s wireless network capabilities, including creating a wireless network, enabling wireless security, and viewing the Gateway’s wireless connection status. 28 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 4.1 Accessing Wireless Setup To access the Gateway’s Wireless Settings: 1. Open a Web browser. In the “Address” text box, type: http://192.168.1.1 then press Enter on the keyboard. 2. The “Home” screen appears. Click Wireless Setup. 29 © 2008 Verizon. All Rights Reserved.
4 Wireless Settings 4.1 Accessing Wireless Setup 3. A login window appears. Enter the user name and password in the appropriate text boxes, then click OK. Note: The default user name is “admin.” The default password is “password.” 30 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 4. The “Wireless Basic Settings” screen appears. To modify a specific configuration, click on its name in the menu bar on the left, or from the list in the middle of the screen. 31 © 2008 Verizon. All Rights Reserved.
4 Wireless Settings 4.2 Basic Wireless Setup 4.2 Basic Wireless Setup To perform a basic setup of a wireless network using the Gateway: 1. In the “Wireless Basic Settings” screen, turn the Gateway’s wireless radio on by selecting On. 2. Create a name for the wireless network and enter it in the “ESSID” text box. 3. Select a channel from the “Channel” drop-down menu. In the United States, use channels 1-11. 4. Activate WEP (Wired Equivalent Privacy) to secure the wireless network by selecting WEP. 5.
Wireless DSL Gateway User Manual 10/16/08 4.3 Wireless Advanced Settings To access the Gateway’s wireless advanced settings screens, select Advanced Settings from the menu on the left side of the “Wireless Basic Settings” screen. This generates the “Wireless Advanced Settings” screen. In this screen, the security of the wireless network can be activated and fortified. 4.
4 Wireless Settings 4.3 Wireless Advanced Settings WEP Selecting WEP in the Wireless Advanced Settings screen generates the “WEP Key” screen. Here, the authentication type, encryption level, and WEP keys are entered to activate WEP (Wired Equivalent Privacy) security encryption for the wireless network. Authentication Type - There are three authentication types: Open, Shared, and Both. Open authenticaton allows any wireless-enabled device to recognize the network, even if the WEP key is invalid.
Wireless DSL Gateway User Manual 10/16/08 256-bit WEP - 256-bit WEP requires one or more keys, each key comprising 29 hexadecimal pairs. A hexadecimal digit consists of an alphanumeric character ranging from 0-9 or A-F. To create a 256-bit WEP key, activate Key 1 by clicking in the appropriate circle, select “256 bit” from the drop-down list on the right, then enter 29 hexadecimal digit pairs in the Key text box.
4 Wireless Settings 4.3 Wireless Advanced Settings WPA, WPA2, AnyWPA Activating any of the three WPA (Wi-Fi Protected Access) options in the Wireless Advanced Settings screen generates a “Wireless WPA Settings” screen. The three WPA options use identical procedures to activate, although WPA2 provides stronger security than standard WPA. AnyWPA activates both WPA and WPA2. There are two levels of WPA. “Pre-Shared Key (PSK) for Home Network” is for home network security.
Wireless DSL Gateway User Manual 10/16/08 ESSID Broadcast Selecting ESSID Broadcast in the Wireless Advanced Settings screen generates the “ESSID Broadcast” screen. To prevent a unwanted computers from joining the Gateway’s wireless network by using an ESSID of “Any,” select Disable in the ESSID Broadcast screen. To broadcast the wireless network’s ESSID, select Enable. When finished with this screen, click Apply to save all changes. To return to the Wireless Advanced Settings screen, click Back.
4 Wireless Settings 4.3 Wireless Advanced Settings Wireless MAC Authentication Selecting Wireless MAC Authentication in the Wireless Advanced Settings screen generates the “Wireless MAC Authentication” screen. This feature allows the user to control the wireless LAN network by denying or allowing wireless access by specifying the MAC address of the wireless client(s) allowed or denied access on the wireless network. To do this, follow the instruction on-screen.
Wireless DSL Gateway User Manual 10/16/08 802.11b/g Mode Selecting 802.11b/g Mode in the Wireless Advanced Settings screen generates the “802.11b/g Mode” screen. Access to the Gateway’s network can be restricted to wireless clients using either the 802.11b or 802.11g wireless adapters. Click on the down arrow next to the drop-down menu and select the desired option. We recommend using the “Mixed” mode (the default option), which enables both 802.11b and 802.11g wireless clients to join the network.
4 Wireless Settings 4.4 Wireless Status 4.4 Wireless Status To view the Gateway’s wireless status and settings, select Wireless Status from the menu on the left side of the “Wireless Basic Settings” screen. The “Wireless Status” screen appears, which displays all of the settings of the Gateway’s wireless network settings. 40 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 4.5 WPS (WiFI Protected Setup) WiFi Protected Setup (WPS) provides an easier way to set up a wireless network. Instead of entering passwords or multiple keys on each wireless client (laptop, printer, external hard drive, etc.), the Router can create a wireless network that only requires pressing buttons (one on the Router, and one on the client [either built-in, or on a compatible wireless card]) to allow wireless clients to join the Router’s wireless network. 4.
4 Wireless Settings 4.5 WPS (WiFI Protected Setup) 2. Activate WPS by clicking the “On” radio button under “Turn WPS ON.” 3. Click Apply at the bottom of the screen. The Router is now ready to accept WPS clients on its wireless network. 4.5a Joining the WPS Wireless Network To join the WPS wireless network, press the “Wi-Fi Protected Setup” button on the front panel of the Router, then press the WPS button on the wireless client.
5 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 5.11 5.12 5.13 Introduction Accessing Advanced Settings DSL Settings DHCP Settings LAN IP Address WAN IP Address QoS Settings Remote Management Dynamic Routing Static Routing UPnP (Universal Plug and Play USB Port Detection Time Zone Remote Syslog Capture Configuring Advanced Settings 43 © 2008 Verizon. All Rights Reserved.
This chapter explains how to configure the Gateway’s advanced settings, including remote management, DHCP settings, and Quality of Service (QoS). 44 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 5.1 Accessing Advanced Settings To access the Gateway’s Advanced Settings: 1. Open a Web browser. In the “Address” text box, type: http://192.168.1.1 then press Enter on the keyboard. 2. The “Home” screen appears. Click Advanced Setup. 45 © 2008 Verizon. All Rights Reserved.
5 Advanced Settings 5.1 Accessing Advanced Settings 3. A login window appears. Enter the user name and password in the appropriate text boxes, then click OK. Note: The default user name is “admin.” The default password is “password.” 46 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 4. The “Advanced Setup” screen appears. To modify a specific configuration, click on its name in the menu bar on the left, or from the list in the middle of the screen. 47 © 2008 Verizon. All Rights Reserved.
5 Advanced Settings 5.2 DSL Settings 5.2 DSL Settings To access DSL Settings, select DSL Settings from the “Advanced Setup” screen. The Gateway’s VPI, VCI, Mode, and QoS (Quality of Service) settings can be changed from this screen, we recommend not changing these values without first consulting the ISP. 5.3 DHCP Settings Selecting DHCP Settings in the “Advanced Setup” screen generates the “DHCP Settings” screen.
Wireless DSL Gateway User Manual 10/16/08 We strongly recommend leaving the DHCP Server option On. If the DHCP Server option is Off, ensure the IP addresses of the networked computers are on the same subnet as the IP address of the Gateway. For more information, see “DHCP Server Configuration.” 5.3a DHCP Server Configuration Clicking in the check box labeled “I would like to adjust the DHCP server settings” activates the text boxes at the bottom of the DHCP Settings screen.
5 Advanced Settings 5.4 LAN IP Address Domain Name This is the domain name provided by Verizon. If Verizon provided domain name information, enter it here. If not, leave the text box intact. DNS (Dynamic or Static) This is the type of DNS server provided by Verizon. If Verizon provided DNS server information, select the type here. If not, leave as is. DNS Server 1 This is the primary DNS server provided by Verizon. If Verizon provided DNS server information, enter it here.
Wireless DSL Gateway User Manual 10/16/08 Read the on-screen warning, then click Yes to continue. The “LAN IP Address” screen appears. The values in the “Modem IP Address” and “Modem Subnet Mask” text boxes are the IP and subnet mask address of the Gateway as seen on the network. These values can be modified for your LAN network, but we recommend keeping the default factory settings (IP address 192.168.1.1; subnet mask address 255.255.255.0).
5 Advanced Settings 5.5 WAN IP Address The “WAN IP Address” screen appears. WAN IP Address allows manual set up of the IP address of the Gateway. To do this: Note: Some DSL providers use PPPoE to establish communication with an end user. Other types of broadband Internet connections (such as fixed point wireless) may use either DHCP or static IP address. If unsure which connection is present, check with Verizon before continuing. 1.
Wireless DSL Gateway User Manual 10/16/08 4. Enable Public/Private IP Addressing. This feature is used in conjunction with Multiple Static IP Addresses. When selected, the Gateway uses NAT for private IP addressing for the LAN, allowing both public and private IP addressing to be configured to the LAN simultaneously, while the DHCP server is reserved for private IP addressing. All computers using public IP addresses must have the public IP addresses statically assigned. 5. Select the DNS type.
5 Advanced Settings 5.6 QoS Settings 5.6 QoS Settings There are three QoS (Quality of Service) settings available through the Gateway’s Advanced Settings: QoS Settings Upstream, QoS Settings Downstream, and QoS Status. 5.6a QoS Settings Upstream Selecting QoS Settings Upstream from the “Advanced Setup” screen causes the “QoS Upstream Settings” screen to appear.
Wireless DSL Gateway User Manual 10/16/08 Enable QoS Clicking in this check box activates/deactivates QoS. Trusted Mode If “Trusted Mode” is activated, all data traffic set to an IP precedence level of 5 will be recognized as high priority traffic, regardless of IP or MAC address rule settings (used for VoIP only). Total Available Bandwidth Displays the total amount of available bandwidth (in kilobits per second).
5 Advanced Settings 5.6 QoS Settings Rule List After finishing the configuration of the QoS settings, click Add to save the settings in the Rule List menu box. This collection of QoS settings can then be reused at a future time. If deleting a QoS rule list, highlight it, then click Remove. When finished in this screen, click Apply to activate any changes made. 5.
Wireless DSL Gateway User Manual 10/16/08 5.6c QoS Status Selecting QoS Status from the “Advanced Setup” screen causes the “IP QoS Status” screen to appear. This screen displays the status of QoS upstream and downstream traffic, and differentiates both streams into high priority and normal priority traffic. 57 © 2008 Verizon. All Rights Reserved.
5 Advanced Settings 5.7 Remote Management/Telnet 5.7 Remote Management/Telnet Selecting Remote Management in the “Advanced Setup” screen generates the “Remote Management/Telent” screen. Remote management allows access to the Gateway through the Internet via another computer, while Telnet allows access to the Gateway using a computer running a Telnet program. we recommend leaving the Remote Management and Telnet Off (the factory default setting).
Wireless DSL Gateway User Manual 10/16/08 5.7b Telnet To access the Gateway via Telnet, activate Telnet by selecting the appropriate “On” radio button and writing down the WAN IP address of the Gateway (see “WAN IP Address”). On a computer outside the network running a Telnet program, enter the Gateway’s WAN IP address to access the Gateway. Note: Before remote management or Telnet can be activated, the administrator password must be set.
5 Advanced Settings 5.8 Dynamic Routing 5.8 Dynamic Routing Selecting Dynamic Routing in the “Advanced Setup” screen generates the “Dynamic Routing” screen. If another gateway or router is set up behind the Gateway in the network configuration, consult the documentation that came with the other gateway to see what kind of Dynamic Routing is required, then select the needed option. When finished in this screen, click Apply to activate any changes made. 5.
Wireless DSL Gateway User Manual 10/16/08 5.10 UPnP (Universal Plug and Play) Selecting UPnP in the “Advanced Setup” screen generates the “UPnP” screen. In this screen, the Universal Plug and Play option is turned on or off by activating the appropriate circle. Universal Plug and Play is a zero-configuration networking protocol that allows hardware and software (such as Netmeeting) to operate more efficiently. If Netmeeting is not running properly, activate UPnP.
5 Advanced Settings 5.12 Time Zone 5.12 Time Zone Selecting Time Zone in the “Configuring the Advanced Settings” screen generates the “Time Zone” screen. In this screen, select the time zone in which the Gateway is being used. Click in the “Day Light Saving” check box if Daylight Savings Time is currently in effect where the Gateway is being used. When finished in this screen, click Apply to activate any changes made. 5.
6 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 Introduction Accessing Wired Security Settings Firewall Applications Rule Management DMZ Hosting NAT (Network Address Translation) Port Mapping Configuring Security Settings 63 © 2008 Verizon. All Rights Reserved.
This chapter explains how to configure the Gateway’s wired security capabilities, including firewall settings, DMZ hosting, and network address translation. 64 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 6.1 Accessing Wired Security Settings To access the Gateway’s Wired Security Settings: 1. Open a Web browser. In the “Address” text box, type: http://192.168.1.1 then press Enter on the keyboard. 2. The “Home” screen appears. Click Security. 65 © 2008 Verizon. All Rights Reserved.
6 Security Settings 6.1 Accessing Wired Security Settings 3. A login window appears. Enter the user name and password in the appropriate text boxes, then click OK. Note: The default user name is “admin.” The default password is “password.” 4. The “Security” screen appears. To modify a specific configuration, click on its name in the menu bar on the left, or from the list in the middle of the screen. 5. For information about “Admin User Name and Password,” see “Changing the Password” in chapter 2.
Wireless DSL Gateway User Manual 10/16/08 6.2 Firewall Selecting Firewall in the Security screen generates the “Firewall Settings” screen. Select the level of security needed for the network. 6.2a High If High is selected in the “Firewall Security Level” screen, the services listed at the bottom of the screen (HTTP, DNS, FTP, IMAPv3, SMTP, POP3, NNTP, IPSEC IKE, IPSEC ESP, HTTPS, and IMAP) are the only ones allowed to pass through the firewall. All other services will be blocked.
6 Security Settings 6.2 Firewall 6.2b Medium If Medium is selected in the “Firewall Security Level” screen, the services listed at the bottom of the screen (HTTP, DNS, FTP, IMAPv3, SMTP, POP3, NNTP, IPSEC IKE, IPSEC ESP, HTTPS, and IMAP) are the only ones allowed to pass through the firewall. All other services will be blocked. These settings can be modified to customize the firewall settings. When finished with this screen, click Apply to save the changes. 68 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 6.2c Low If Low is selected in the “Firewall Security Level” screen, the services listed at the bottom of the screen (NETBIOS-SSN, DNS, EPMAP, PROFILE, NETBIOS-NS, NETBIOS-DGM, MICROSOFT-DS, SNMP, LDAP, and MICROSOFT-GC,) can be denied access through the firewall. Click in the appropriate check box to allow or deny access for a particular service (check mark in the check box to deny; blank check box to allow). All services not listed are allowed access. 6.
6 Security Settings 6.3 Applications 6.3 Applications Selecting Applications in the Security screen generates the “Applications” screen. This screen allows certain programs to bypass the Gateway’s built-in firewall, allowing access to parts of the network (for hosting a Web or ftp server, for example). To use, select the name of a computer on the network from the “PC Name” drop-down list, then click Add. Next, select a “Category” by clicking the appropriate radio button.
Wireless DSL Gateway User Manual 10/16/08 6.4 Rule Management To create a custom set of rules, click the “User” radio button, then click New. The “Rule Management” screen appears. In this screen, the user can create a custom set of rules for a game or application not listed in the Applications screen. Enter the “Rule Name,”“Protocol,”“Port Start,”“Port End,” and “Port Map” in the appropriate text boxes, then click Apply.
6 Security Settings 6.6 NAT (Network Address Translation) DMZ hosting is used to support online gaming and Internet conferencing services. These programs usually require multiple open ports, making the network accessible from the Internet. DMZ hosting symbolically places the DMZ host computer outside of the Gateway’s network. We recommend activating DMZ hosting only as long as necessary. When finished with this screen, click Apply to save the changes.
Wireless DSL Gateway User Manual 10/16/08 6.7 Port Mapping Selecting Port Mapping in the “Security” screen generates the “TR-069 PortMapping Log” screen. This screen displays a log that lists port mapping changes made remotely by the service provider via the TR-069 protocol. This log is for information only, and should be consulted only if requested by the service provider or support technicians. No changes to the Gateway can be made from this screen. 73 © 2008 Verizon. All Rights Reserved.
7 7.0 7.1 7.2 7.3 7.4 Introduction Accessing Parental Controls Services Blocking Website Blocking Schedule Rules Configuring Parental Controls 74 © 2008 Verizon. All Rights Reserved.
This chapter explains how to configure the parental control capabilities of the Gateway, including services blocking, Web site blocking, and schedule rules. 75 © 2008 Verizon. All Rights Reserved.
7 Parental Controls 4.1 Accessing Parental Controls 4.1 Accessing Parental Controls To access the Gateway’s Parental Controls: 1. Open a Web browser. In the “Address” text box, type: http://192.168.1.1 then press Enter on the keyboard. 2. The “Home” screen appears. Click Parental Control. 76 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 3. A login window appears. Enter the user name and password in the appropriate text boxes, then click OK. Note: The default user name is “admin.” The default password is “password.” 4. The “Parental Control” screen appears. To modify a specific setting, click on its name in the menu bar on the left, or from the list in the middle of the screen. 77 © 2008 Verizon. All Rights Reserved.
7 Parental Controls 7.2 Services Blocking 7.2 Services Blocking Selecting Services Blocking in the Parental Control screen generates the “Services Blocking” screen. To modify Internet privileges (Web, FTP, Newsgroups, etc.) for the computers on the network: 1. Select the computer’s network name from the “PC Name” drop-down menu. 2. Select the Internet service(s) to be blocked by clicking in the appropriate check box. 3. Click Apply to block the selected service from the selected computer.
Wireless DSL Gateway User Manual 10/16/08 7.3 Website Blocking Selecting Website Blocking in the Parental Control screen generates the “Website Blocking” screen. This feature enables the Gateway to block Web sites to any or all computers on the network. To block a Web site, select the computer name from the “PC Name” drop-down menu. Then, enter the address of the Web site to be blocked in the “Website” text box and click Add.
7 Parental Controls 7.4 Schedule Rules 7.4 Schedule Rules Selecting Schedule Rules in the Parental Control screen generates the “Schedule Rules” screen. Schedule rules allow computers on the network to access the Internet at scheduled times only. To set up schedule rules for a computer on the network: 1. Select the computer’s network name from the “PC Name” drop-down menu. 2. Click View/Edit Access Details. The computer’s “Allowed Application and Times” screen appears. 80 © 2008 Verizon.
Wireless DSL Gateway User Manual 10/16/08 3. To schedule Internet access at the same time every day, select “Daily” by clicking the appropriate radio button. If creating different access schedules on a day-to-day basis, select “Weekly.” 4. If “Daily” was selected in step 3, create a period of Internet access (or rule) by selecting a beginning time (from the “From” drop-down menu) and ending time (from the “To” drop down menu). If allowing Internet access to a particular computer from 6 p.m. to 8 p.m.
7 Parental Controls 7.4 Schedule Rules 5. If “Weekly” was selected in step 3, periods of Internet access can be scheduled at different times on different days (6 p.m. to 8 p.m. on Friday, and 1 p.m. to 4 p.m. on Saturday, for example). To do this, select the day of the week by clicking in the appropriate check box, then create a access period (or rule), as explained in step 4. Click Add for each separate time period. All access periods created will appear in the Rules list box.
8 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 Introduction Accessing Utilities Restore Default Settings Upgrade Firmware Multiple PVC Web Activity Log System Log OAM Ping Test Ping Test Reboot Configuring Utilities 83 © 2008 Verizon. All Rights Reserved.
This chapter explains how to use the Gateway’s utilities, including how to restore default settings, upgrade the Gateway’s firmware, and perform a ping test. 84 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 8.1 Accessing Utilities To access the Gateway’s Utilities: 1. Open a Web browser. In the “Address” text box, type: http://192.168.1.1 then press Enter on the keyboard. 2. The “Home” screen appears. Click Utilities. 85 © 2008 Verizon. All Rights Reserved.
8 Utilities 8.1 Accessing Utilities 3. A login window appears. Enter the user name and password in the appropriate text boxes, then click OK. Note: The default user name is “admin.” The default password is “password.” 4. The “Utilities” screen appears. To modify a specific configuration, click on its name in the menu bar on the left, or from the list in the middle of the screen. 86 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 8.2 Restore Default Settings To restore the Gateway to its factory default settings, select Restore Default Settings from the Utilities screen. When the “Restore Default Settings” screen appears, click Restore Default Settings. Any changes made to the Gateway’s settings will be lost and the factory default settings restored. During this process, the Gateway’s Power light flashes and the Gateway is disabled.
8 Utilities 8.4 Multiple PVC 8.4 Multiple PVC Selecting Multiple PVC in the Utilities screen generates the “Multiple PVC” screen, which allows the configuration of multiple PVCs. 8.5 Web Activity Log The Web Activity Log provides information about the Web sites each computer on the Gateway’s network has visited. To access the Web Activity Log, select Web Activity Log from the Utilities screen. 88 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 8.5a Auto Refresh To set the Web Activity Log screen to automatically refresh at certain intervals, activate the circle next to “Auto Refresh Every” at the bottom of the Web Activity Log screen, then enter a time value (in seconds) in the text box, or click on the down arrow and select a time value from the menu that appears. The Web Activity Log will refresh at the selected interval. 8.
8 Utilities 8.7 OAM Ping Test 8.6c Apply Pressing this button saves any changes to the System Log screen and causes the Save and Restart screen to appear. 8.6d Save Log As Pressing this button allows the user to save a log as a file. 8.7 OAM Ping Test Selecting OAM Ping Test from the Utilities screen generates the “OAM Ping Test” screen, which is used to check whether the Gateway is properly connected to the network. Follow the on-screen instructions to perform the test. 90 © 2008 Verizon.
Wireless DSL Gateway User Manual 10/16/08 8.8 Ping Test Selecting Ping Test from the Utilities screen generates the “Ping Test” screen, which is used to check whether the Gateway is properly connected to the Internet. Follow the on-screen instructions to perform the test. 8.9 Reboot Selecting Reboot from the Utilities screen generates the “Reboot” screen. From this screen, the Gateway can be rebooted. To do this: 1. From the first Reboot screen, click Reboot. 91 © 2008 Verizon. All Rights Reserved.
8 Utilities 8.9 Reboot 2. A confirmation window appears. Click OK. 3. The Gateway reboots. Read the onscreen information in the screen that appears. When the Gateway’s Power light stops flashing, the Gateway has rebooted. 92 © 2008 Verizon. All Rights Reserved.
9 9.0 9.1 9.2 Introduction Troubleshooting Frequently Asked Questions Troubleshooting 93 © 2008 Verizon. All Rights Reserved.
This chapter contains a list of problems that may be encountered while using the Gateway, and techniques to try and overcome the problem. Note that these techniques may not solve the problem. This chapter also include a list of frequently asked questions. 94 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 9.1 Troubleshooting LAN Connection Failure s Ensure the Gateway is properly installed, the LAN connections are correct, and the power is on. s Confirm the computer and Gateway are on the same network segment. If unsure, let the computer get the IP address automatically by initiating the DHCP function (see “DHCP Server” in chapter 3), then verify the computer is using an IP address within the default range (192.168.1.2 through 198.168.1.254).
9 Troubleshooting 9.1 Troubleshooting 5. If the Ethernet adapter is showing an incorrect IP address, click Release, which sets all values back to zero. Then, click Renew (this process may take a few seconds). The renewed IP address should be on the 192.168.1.x network. 6. If an error occurs, or the IP address renews with an address outside the 192.168.1.x network, contact the ISP immediately. s If running Windows 2000 or XP, check the computer’s TCP/IP settings by doing the following: 1.
Wireless DSL Gateway User Manual 10/16/08 s Shutdown and restart the computer. After the computer restarts, unplug the power cord from the Gateway and plug it back in. When the lights glow solid green, try accessing the Internet. Time out error occurs when entering a URL or IP Address s Verify all the computers are working properly. s Ensure the IP settings are correct. s Ensure the Gateway is on and connected properly.
9 Troubleshooting 9.2 Frequently Asked Questions Which connection speeds does the Gateway support? The LAN connections on the Gateway support 10/100 Mbps. The WAN connection supports 8 Mbps, because of the physical restrictions placed on broadband connections. The 802.11g wireless connection supports up to 54 Mbps connection speeds (depending on signal quality, environmental factors, and physical distance). Will my Xbox work with the Gateway? Yes, the Gateway is compatible with the Xbox.
Wireless DSL Gateway User Manual 10/16/08 Which wireless cards will work with the Gateway? The Gateway connects with any wireless card supporting the 802.11g/802.11b wireless standards. Can my wireless signal pass through floors, walls, and glass? The physical environment surrounding the Gateway can have a varying effect on signal strength and quality. Generally, the more dense the object (a concrete wall compared to a plaster wall, for example), the greater the interference.
9 Troubleshooting 9.2 Frequently Asked Questions How do I find out what IP address my computer is using? Windows 95, 98, 98SE, and Me - Select Start, Run, and type “winipcfg.” Press Enter. When the “Winipcfg” window appears, ensure your network device is selected. Windows NT, 2000, and XP - Select Start, Run and type “cmd.” Press Enter. When the command screen appears, type “ipconfig” and press Enter. I used DHCP to configure my network. Do I need to restart my computer to refresh my IP address? No.
Wireless DSL Gateway User Manual 10/16/08 9.2d Connections How many computers can be connected through the Gateway? The Gateway is capable of 254 connections, but it is recommended to have no more than 45 connections. As you increase the number of connections, you decrease the available speed for each computer. Security What is the default username for the Gateway? The default username for the router is “admin” and the default password is “password” (all lower case, no quotation marks).
A A.0 A.1 A.2 Introduction Locating Computer Information Locating Windows Operating System Files Reference 102 © 2008 Verizon. All Rights Reserved.
This appendix contains information about various topics, including accessing information about your Windows computer. 103 © 2008 Verizon. All Rights Reserved.
A Reference A.1 Locating Computer Information A.1 Locating Computer Information The following procedure is valid for Windows 98 SE, Me, NT 4.0, 2000 and XP. 1. From the desktop, right-click on My Computer. 2. Select Properties from the menu that appears. 3. When the “System Properties” window appears, select General. The version of the operating system, processor type, and amount of RAM installed in the computer are listed here. 4. Close the System Properties window. 5.
Wireless DSL Gateway User Manual 10/16/08 5. Click the down arrow next to the “Look In” text box and select My Computer from the list that appears. 6. Click Find Now. 7. When the search is complete, note the directory path that appears most often in the “In Folder” column. For example: C:\WINDOWS \SYSTEM. 8. The Windows operating system files are located in this directory. Write down the directory path for future reference. 9. Close the Find: All Files window. A.2b Windows Me, 2000 1.
A Reference A.2 Locating Windows Operating System Files A.2c Windows NT 4.0 1. From the desktop, click Start. 2. When the menu appears, select Find, then Files or Folders. 3. When the “Find: All Files” window appears, select Name & Location. 4. In the “Named” text box, enter: i386 5. Click the down arrow next to the “Look In” text box and select My Computer from the list that appears. 6. Click Find Now. 7.
Wireless DSL Gateway User Manual 10/16/08 8. The Windows operating system files are located in this directory. Write down the directory path (followed by “\i386”) for future reference. 9. Close the Search Results window. 107 © 2008 Verizon. All Rights Reserved.
B B.0 B.1 B.2 B.3 B.4 Introduction Windows 98 SE Windows Me Windows 2000 Windows XP Setting Up Static IP 108 © 2008 Verizon. All Rights Reserved.
To communicate with the Gateway from a computer on the network (to access the Web Configuration screens, for example), the user may have to switch the IP address settings from DHCP-enabled to static IP, so that the computer and the Gateway are on the same subnet. 109 © 2008 Verizon. All Rights Reserved.
B Static IP B.1 Windows 98 SE Note: The following procedures are based on the Gateway’s factory default IP address. If the Gateway’s IP address has been changed, enter the new IP address when instructed to enter an IP address. B.1 Windows 98 SE 1. From the desktop, click Start in the lower left corner. 2. From the menu that appears, select Settings. 3. Another menu appears. Select Control Panel. 110 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 4. When the “Control Panel” window appears, double-click Network. 5. The “Network” window appears. In the “The following network components are installed” list box, locate and double-click TCP/IP. 111 © 2008 Verizon. All Rights Reserved.
B Static IP B.1 Windows 98 SE 6. The “TCP/IP Properties” window appears. Select IP Address. 7. In the IP Address tab, make sure the the circle next to “Specify an IP Address” is selected. When active, a black dot appears in the circle. If the circle already contains a black dot, leave it alone. 8. Enter the following numbers in the “IP Address” text box: 192.168.1.2 Do not include the periods; they are automatically entered. 9. Enter the following numbers in the “Subnet mask” text box: 255.255.255.
Wireless DSL Gateway User Manual 10/16/08 12. The “System Settings Change” window appears, asking whether the computer should be restarted. Click Yes. The computer restarts. It is now set up with a static IP address, allowing the user to access the Gateway’s Web Configuration Utilities (Advanced Setup, Utilities, etc.). B.2 Windows Me 1. From the desktop, click Start in the lower left corner. 2. From the menu that appears, select Settings. 113 © 2008 Verizon. All Rights Reserved.
B Static IP B.2 Windows Me 3. Another menu appears. Select Control Panel. 4. When the “Control Panel” window appears, double-click Network. 114 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 5. The “Network” window appears. In the “The following network components are installed” list box, locate and double-click TCP/IP. 6. The “TCP/IP Properties” window appears. Click IP Address. 115 © 2008 Verizon. All Rights Reserved.
B Static IP B.2 Windows Me 7. In the “IP Address” tab, make sure the the circle next to “Specify an IP Address” is selected. When active, a black dot appears in the circle. If the circle already contains a black dot, leave it alone. 8. Enter the following numbers in the “IP Address” text box: 192.168.1.2 Do not include the periods; they are automatically entered. 9. Enter the following numbers in the “Subnet mask” text box: 255.255.255.0 Do not include the periods; they are automatically entered. 10.
Wireless DSL Gateway User Manual 10/16/08 B.3 Windows 2000 1. From the desktop, click Start in the lower left corner. 2. From the menu that appears, select Settings. 3. Another menu appears. Select Control Panel. 117 © 2008 Verizon. All Rights Reserved.
B Static IP B.3 Windows 2000 4. When the “Control Panel” window appears, double-click Network and Dialup Connections. 5. In the “Network and Dial-up Connections” window, double-click Local Area Connection. A number may be displayed after the Local Area Connection. If there is more than one Local Area Connection listed, locate the one that corresponds to the network card installed in the computer by finding the name of the network card in the “Device Name” column. 118 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 6. The “Local Area Connection Status” window appears. Select General, then click Properties. 7. The “Local Area Connection Properties” window appears. Click General. 8. In the “Components checked are used by this connection” list box, doubleclick Internet Protocol (TCP/IP). 119 © 2008 Verizon. All Rights Reserved.
B Static IP B.3 Windows 2000 9. The “Internet Protocol (TCP/IP) Properties” window appears. 10. In the “General” tab, make sure the the circle next to “Use the following IP Address ” is selected. When active, a black dot appears in the circle. If the circle already contains a black dot, leave it alone. 11. Enter the following numbers in the “IP Address” text box: 192.168.1.2 Do not include the periods; they are automatically entered. 12. Enter the following numbers in the “Subnet mask” text box: 255.255.
Wireless DSL Gateway User Manual 10/16/08 B.4 Windows XP 1. From the desktop, click Start in the lower left corner. 2. From the menu that appears, select Control Panel. 3. When the “Control Panel” window appears, double-click Network Connections. 121 © 2008 Verizon. All Rights Reserved.
B Static IP B.4 Windows XP 4. In the “Network Connections” window, double-click Local Area Connection. A number may be displayed after the Local Area Connection. If more than one Local Area Connection is listed, locate the one that corresponds to the network card installed in your computer by finding the name of the network card in the “Device Name” column. 5. The “Local Area Connection Properties” window appears. Select General. 6.
Wireless DSL Gateway User Manual 10/16/08 7. The “Internet Protocol (TCP/IP) Properties” window appears. 8. In the General tab, make sure the circle next to “Use the following IP Address” is selected. When active, a black dot appears in the circle. If the circle already contains a black dot, leave it alone. 9. Enter the following address in the “IP Address” text box: 192.168.1.2 Enter the periods in the address by pressing the space bar on the keyboard. 10.
C C.0 C.1 C.2 C.3 C.4 C.5 Introduction Overview Comparing DSL Service with a Dial-Up Modem Gateway Security Computer Security Electronic Security Computer Security 124 © 2008 Verizon. All Rights Reserved.
This appendix covers the basics of computer, gateway, and electronic security. 125 © 2008 Verizon. All Rights Reserved.
C Computer Security C.1 Overview C.1 Overview The Internet is a giant network of computers located all over the world. When a computer is connected to the Internet, it can exchange information with any other computer on the Internet. This allows a computer user to send e-mail, surf the World Wide Web, download files, and buy products and services online, but it also makes the computer vulnerable to attack from persons intent on doing malicious mischief, or worse.
Wireless DSL Gateway User Manual 10/16/08 C.3 Gateway Security If connecting to the ISP through Point-to-Point Protocol (PPP), be sure to provide the Gateway an administrative password. If a password is not set, someone on the Internet can access the Gateway and change its configuration or steal your PPP login name and password. For instructions on setting the password, see the “Advanced Setup chapter.
C Computer Security C.5 Electronic Security C.4d Network Applications Network applications (such as software programs) that allow remote access to the computer also make the computer vulnerable to access from other people on the Internet. If using a network application that allows remote access, consider installing a firewall. C.5 Electronic Security The following are two methods to secure your computer electronically. C.
D D.0 D.1 D.2 D.3 D.4 Introduction General Wireless Operating Range LED Indicators Environmental Specifications 129 © 2008 Verizon. All Rights Reserved.
This appendix covers the Gateway’s specifications. 130 © 2008 Verizon. All Rights Reserved.
Wireless DSL Gateway User Manual 10/16/08 D.1 General Model Number GT704-WG (Wireless DSL Gateway) Standards IEEE 802.3 (10BaseT) IEEE 802.3u (100BaseTX) IEEE 802.11g (Wireless) G.dmt G.lite t1.413 RFC 1483, 2364, 2516 Protocol LAN - CSMA/CD WAN - PPP, DHCP, Static IP WAN Full-rate ADSL Interface LAN 10/100 RJ-45 switched port USB port Speed LAN Ethernet: 10/100 Mbps auto-sensing Wireless: 802.
D Specifications D.2 Wireless Operating Range Cabling Type Ethernet 10BaseT: UTP/STP Category 3 or 5 Ethernet100BaseTX: UTP/STP Category 5 USB D.2 Wireless Operating Range Indoors Up to 91M (300 ft.) @ 54 Mbps Outdoors Up to 457M (1500 ft.) @ 54Mbps Topology Star (Ethernet) D.3 LED Indicators Power, DSL, Internet, Ethernet (4), USB, Wireless D.
Wireless DSL Gateway User Manual 10/16/08 Operating Humidity 10% to 85% non-condensing Storage Humidity 5% to 90% non-condensing 133 © 2008 Verizon. All Rights Reserved.
E E.0 E.1 Introduction Glossary Glossary 134 © 2008 Verizon. All Rights Reserved.
This appendix contains a list of terms and definitions concerning the gateway and its technologies. 135 © 2008 Verizon. All Rights Reserved.
E Glossary E.1 Glossary E.1 Glossary Access Point A device that allows wireless clients to connect to one another. An access point can also act as a bridge between wireless clients and a “wired” network, such as an Ethernet network. Wireless clients can be moved anywhere within the coverage area of the access point and remain connected to the network.
Wireless DSL Gateway User Manual 10/16/08 Encryption A method to allow wireless data transmissions a level of security. ESSID (Extended Service Set Identifier) A unique identifier for a wireless network. Also known as “SSID.” Ethernet Network A standard wired networking configuration using cables and hubs. Firewall A method preventing users outside the network from accessing and/or damaging files or computers on the network.
E Glossary E.1 Glossary MAC (Media Access Control) Address The hardware address of a device connected to a network. NAT (Network Address Translation) A method allowing all of the computers on a home network to use one IP address, enabling access to the Internet from any computer on the home network without having to purchase more IP addresses from the ISP. PC Card An adapter that inserts in the PCMCIA slot of a computer, enabling the communication with a device.
Wireless DSL Gateway User Manual 10/16/08 WAN (Wide Area Network) A network that connects computers located in separate areas, (i.e., different buildings, cities, countries). The Internet is a WAN. WECA (Wireless Ethernet Compatibility Alliance) An industry group that certifies cross-vender interoperability and compatibility of IEEE 802.11b wireless networking products and promotes the standard for enterprise, small business, and home environments.
F F.0 F.1 Introduction Service Acronym Definitions Service Acronyms 140 © 2008 Verizon. All Rights Reserved.
The information in this appendix is related to the Firewall options (High, Medium, and Low) section in the “Advanced Settings” chapter of this manual. This appendix explains the meaning of the service acronyms included with the various levels of firewall security, and the UDP and TCP ports used by each service. 141 © 2008 Verizon. All Rights Reserved.
F Service Acronyms F.1 Service Acronym Definitions F.1 Service Acronym Definitions DNS Domain Name System. A data query system used to translate host names into Internet addresses (i.e., www.somewebsite.com translates to 888.999.000.111). Uses UDP 53 and TCP 53. EPMAP EndPoint Mapper. Uses UDP 135 and TCP 135. FTP File Transfer Protocol. A protocol used to transfer files over the Internet. Uses TCP 20 and 21. HTTP HyperText Transfer Protocol.
Wireless DSL Gateway User Manual 10/16/08 LDAP Lightweight Directory Access Protocol. A set of protocols for accessing information directories. Uses TCP 389. MICROSOFT-DS, -GC -DS uses UDP 445 and TCP 445; -GC uses TCP 3268. NETBIOS-NS, -DGM, -SSN Network Basic Input Output System. Three types of DOS BIOS augmentation which add functions for local area networks (LANs). -NS uses UDP 137 and TCP 137; -DGM uses UDP 138; -SSN uses TCP 138. NNTP Network News Transfer Protocol.
