Operation Manual

Verizon Wireless VZAccess Manager7

Step 2

On first-run of VZAccess Manager the Setup Wizard

will automatically run. You will be presented with a

Welcome screen.

If you have an Internet connection, it is recommend

that you check to see if you are running the lastest

version of VZAccess Manager. Click the Check for

Updates button to perform this check.

Click Next to continue.

Step 3

In this step of the Setup Wizard you must specify the

type of wireless device that you intend to use with

VZAccess Manager. Select "Detect both Wi-Fi and

WWAN", "Detect WWAN device only (1xEV-

DO/1xRTT/CDMA)". For the purposes of this guide,

"Detect both Wi-Fi and WWAN" will be used. Please

note that your experience in Step 4 may be different if

you use a different selection. After making the

appropriate selection, click Next to continue.

Step 4

In this step VZAccess Manager will detect the Wi-Fi

adapters on your computer. If your computer has a

built-in Wi-Fi adapter, you do not need to do anything

and can proceed to the next step. Otherwise, please

insert your Wi-Fi PC Card now. You will need the

drivers for the card if not already installed on the

computer. Once complete, click Next to continue.

Note: WWAN (Wireless Wide Area Network) denotes any 1xEVDO, 1xRTT or CDMA

connection to the Verizon Wireless network such as BroadbandAccess, NationalAccess or Quick 2

Net.