Operation Manual

Venturi Compression Software 30
© 2004 Verizon Wireless
may be used for troubleshooting when working with Verizon Wireless support.
"Exit"
will close Venturi; You can start it again from your "Start Menu", "Programs", "Venturi 2".
To start using Venturi:
Make sure that Venturi is set to "AUTO" (or "On" if configured for manual mode), connect to the
Internet by selecting "NationalAccess - BroadbandAccess", "NationalAccess" or "Quick 2 Net
(14.4kbps)" from VZAccess Manager and then "Connect". Once connected, start browsing web pages.
Additional Tips:
If you ever have trouble loading a page or signing into a site you can temporarily turn Venturi
off by doing the following:
Click on Stop in your browser to stop any data being processed by Venturi. The "V" should stop
spinning. If it does not, exit your browser.
Right click on the Venturi icon in the tray to bring up the user interface.
Click on "OFF".
Click on Refresh or Reload in your browser, to reload the page. If you had to exit your browser in
step 1, launch it and navigate to your desired page. (It should also appear in your browser's history.)
To turn Venturi back on, simply right click on the Venturi icon in the tray and click on "AUTO" (or
"ON" if configured for manual mode).
Note: If your browser fails to stop passing data to Venturi and the "V" will not stop spinning to allow you
to toggle Venturi off, exit your browser, toggle Venturi off, and then launch your browser again.
If you ever have a web page where a graphic fails to load, try right clicking where the graphic
should have loaded and select "Show Picture" or "View Image", and just that image will be
requested and load.
6.3 Downloading Venturi
The VZAccess Manager should come with the latest version of Venturi, but you can check the following
web site for updates to this software:
www.venturiwireless.com/support.html
For troubleshooting tips on using Ventrui, see the On-Line help.
7 Settings in other Applications
This section describes special settings that might be required to use them over the Verizon Wireless
wireless network.
7.1 Sync Applications
Palm Incorporated's HotSync
®
and Microsoft Corporation's ActiveSync
®
are used for Personal Digital
Assistants (PDAs). These programs are used to synchronize files between a laptop or desktop PC and
the PDA. These programs may conflict with your
WWAN device
. If you have any problems using your
WWAN device, try turning these programs off as explained below:
To turn HotSync On & Off
Right click on the HotSync
®
icon in your task tray and the menu below will appear. Click on "Local