Operation Manual

VZAccess Manager Preferences 22

Note that with certain Wi-Fi adapters the signal strength for Wi-Fi networks is not accurate until

you connect to the network.

Edit:

If you select a connection in the Preferred Network list, the Edit button will become active.

Pressing it will provide you with three additional tabs that will be discussed below.

Remove:

This will remove any other Wi-Fi networks you have added or connected to in the past. Just

select the network, then select "Remove".

------------------------------------------------------------------------------------------

From the Wi-Fi tab (above, "Options", "Preferences", "Wi-Fi" tab) if you select a network listed under

"Preferred Networks" then select the "Edit" button or if you select the "Add" button, one of the following

options will be displayed:

The following options exist on the Network tab:

Network Name:

On the Network tab, for private networks you can edit or enter the Network name and

specify if it is a closed network. Note: The name has to match the network to work. If the network

broadcasts it's ID, instead of manually adding it,

select the Wi-Fi network connection when it appears,

and then select "Connect". If it is password protected you will be prompted to enter your WEP (Wired

Equivalent Privacy) key.

Note:

The name has to match the network to work. Note that this name is case sensitive

when entering it.

Set Password:

This option allows you to modify, delete or enter your Wi-Fi WEP keys for a private Wi-

Fi network..

------------------------------------------------------------------------------------------

The following options exist on the

Connect

tab

("Options", "Preferences", "Wi-Fi" tab, select "Add" or a

network in the "Preferred Network" list and "Edit", then "Connect"):