Operation Manual
Verizon Wireless VZAccess Manager13
© 2004 Verizon Wireless
The Session Information window will also contain a My Computer tab and a Wi-Fi tab if applicable.
The My Computer tab contains detailed information about your computer. This information is helpful
when troubleshooting a problem.
Additional information when using the Quick 2 Net (14.4 kbps) connection:
When using the Quick 2 Net (14.4 kbps) connection, VZAccess Manager enables the Venturi
compression software to roughly double your performance. For additional details see the Venturi
Instructions.
Additional information when using the NationalAccess connection:
By default VZAccess Manager enables the Venturi compression software for the BroadbandAccess
and NationalAccess connections.
If you are using the NationalAccess - BroadbandAccess or NationalAccess connection and the call fails
when you try to connect, with VZAccess Manager returning to its idle state, you should try to connect
again. If you are still having trouble, try the Quick 2 Net (14.4 kbps) connection, if your device supports
it. If you feel you may have incorrectly entered your wireless telephone number during initial setup,
select "Options", "Run Wizard".
Dormancy:
NationalAccess and BroadbandAccess data sessions become dormant if you are not sending or
receiving any data. As soon as you resume sending or receiving data, the data session will return to an
active state.
Depending on your device and your NationalAccess or BroadbandAccess
plan, your data session may
disconnect during a dormant state. See your Verizon Calling Plan brochure for details or visit
www.verizonwireless.com. If this happens, select disconnect, and then connect again.
While dormant your wireless phone / device may be able to receive a voice call. If you leave your
wireless phone connected to your PC, after you finish your voice call you may be able to resume your
data session as you normally would.
3.4 Warning Messages
The first time you connect via the N
ationalAccess
connection, the following warning message will be
displayed: