User manual

INSTALLING UMW190

USB MODEM

EXTENSION CABLE

■

USB MODEM EXTENSION CABLE

The UMW190 USB Modem package includes an extension USB

Y-shaped cable. Although the cable is not required for use

with your UMW190 modem, it offers increased performance

for your UMW190 modem under certain operating

conditions. Simply insert the USB connector into the USB port

of your computing device to deliver power boost, increased

RF performance, and to solve clearance issues.

USING THE USB MODEM EXTENSION CABLE:

Plug the single end of the Y-shaped cable into the

UMW190 Modem. [A]

Depending on the condition you are trying to solve

(power boost, increased RF performance, or clearance

issues), plug either one of the two connected ends of

the USB modem extension cable into the Type A USB

port(s) on your computer. [B]

The USB modem extension cable connector labeled #1, is the

primary data power cable used to either extend the UMW190

modem away from your computer allowing you to locate

the modem in a more optimum signal location or solve any

computer USB port clearance issues. The USB modem exten

sion cable connector labeled #2, is a power boost cable and

must be used with connector #1 to provide the modem up to

1Amp of current for use in weaker signal areas.

#1#2