Specifications

Supplemental Information
83
LTE Broadband 11n Wireless Router MBR1515
Factory Default Settings
Use the Restore Factory Settings button on the bottom of your router to reset all settings to
their original factory default settings. This procedure is called a hard reset. To perform a hard
reset, press and hold the Restore Factory Settings button for 6 seconds. Your router
returns to the factory configuration settings that are shown in the following table.
Feature Default Behavior
Router
login
User login URL http://www.routerlogin.net or http://www.routerlogin.com
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default address
WAN MTU size 1500
Port speed AutoSense
Local
network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
DMZ Disabled
Time zone PST for North America
Daylight saving time adjustment Disabled
Firewall Inbound communication from the
Internet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet)
Enabled (all)
Source MAC filtering Disabled