Specifications

Connect to the Internet
8
LTE Broadband 11n Wireless Router MBR1515
Table 1 describes each LED and button on the front panel of the router.
Table 1. LED descriptions
LED Activity Description
WPS Press the WPS button to open a 2-minute window for the router to connect with other
WPS-enabled devices. For more information about this function, see Use Push 'N' Connect
(WPS) to Configure Your Wireless Network on page 29.
Wireless On/Off This button can be used to control the WiFi radio or both the WiFi radio and mobile broadband
radio. Use the router interface to select the options. The default is set for WiFi radio only.
Power Solid green The router is turned on and operating normally.
Solid amber There has been a power-on self-test failure or device failure.
Off Power is not supplied to the router.
Internet Solid green There is an Internet session.
Blinking green Data is being transmitted over the Internet connection.
Blinking green and amber There has been a failover from WAN to mobile broadband.
Off No Internet connection detected.
WiFi Solid blue The WiFi local port is initialized.
Blinking blue Data is being transmitted or received over the WiFi link.
Off The wireless access point is turned off.
LAN Solid green The local Ethernet ports have detected wired links with computers.
Blinking Data is being transmitted or received.
Off No link is detected on these ports.
WAN Solid green The Ethernet WAN port has detected an active link.
Blinking Data is being transmitted or received.
Off No link is detected on these ports.
4G LTE Solid blue The router is in 4G LTE coverage.
Off No coverage is detected.