Specifications

Advanced
71
LTE Broadband 11n Wireless Router MBR1515
2. Select the radio button of the static route you want to configure.
3. Click Add or Edit to
display the following screen:
4. Fill in or change the fields:
• Route Name. The route name is for identification purposes only.
• Private. Select this check bo
x if you want to limit access to the LAN only.
The static route is not reported in RIP.
• Active. Select this check bo
x to make this route effective.
• Destination IP Address, and
IP Subnet Mask. If the destination is a single host,
type a subnet value of 255.255.255.255.
• Gateway IP Address
. This address has to be a router on the same LAN segment as
the router.
• Metric. Ty
pe a number from 2 through 15. This setting represents the number of
routers between your network and the destination. Usually, a setting of 2 or 3 works,
but if this link is a direct connection, set it to 2. For information about an ISDN router,
see Static Route Example on p
age 70.
5. Click Appl
y to save your changes. If you added a static route, it is added to the Static
Routes screen.
Enable Remote Management
Using the Remote Management screen, you can allow a user or users on the Internet to
configure, upgrade, and check the status of your router.
Tip: Be sure to change the router default password to a secure password.
T
he ideal password should contain no dictionary words from any
language, and should be a mixture of letters (both uppercase and
lowercase), numbers, and symbols. Your password can be up to 30
characters.
 To configure remote management:
1. Log in to the router. Type http://www.routerlogin.net in the address field of your
I
nternet browser. Enter admin for the user name and your password (or the default,
password
).