Specifications

Advanced
54
LTE Broadband 11n Wireless Router MBR1515
Advanced Wireless Settings
From the main menu, select Advanced > Advanced Wireless Settings to display the
following screen:
Wireless Station Access Control
By default, any wireless computer configured with the correct SSID and wireless security
settings is allowed access to your wireless network. You can use wireless access point
settings in the Advanced Wireless Setting screen to further restrict wireless access to your
network:
Field Description
Enable Wireless Router Radio Selected by default, this setting enables the wireless radio, which
allows the router to work as a wireless access point.
Turning off the wireless radio can be helpful for configuration,
network tuning, or troubleshooting.
Fragmentation Length, CTS/RTS
Threshold, and Preamble Mode
These settings should be left at their default settings.
Router’s PIN The PIN number used for Push 'N' Connect.
Disable Router’s PIN By default, this check box is cleared. This setting allows the WPS
clients to discover the router’s PIN.
Keep Existing Wireless Settings By default, this check box is cleared. This setting allows the router to
automatically generate the SSID and WPA/WPA2 security settings
when it implements WPS. After WPS is implemented, the router
automatically selects the Keep Existing Wireless Settings check
box so that your SSID and wireless security settings remain the
same if other WPS-enabled devices are added later.
Set Up Access List Access control is disabled by default so that any computer
configured with the correct SSID can connect. See Restrict Access
by MAC Address on page 55.